Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Focus Delimma

  1. #1

    Focus Delimma

    While out making photographs in the back country last weekend, I ran into a situ ation that caused me a considerable amount of frustration. I was shooting at the top of a cliff above a mountain lake with an interesting rock in front of me ab out five feet away and at the bottom of the 75-100 ft cliff I could see some fal len dead trees near the lake and in the distance a mountain range. I could get t he rock and the distance to focus on the ground glass but had one HELL of a time to get the fallen trees at the bottom of the cliff into clarity. After about 10 minutes of failed attempts I realized that I had two planes to focus and the sh ot was probably doomed from the start. I would appreciate any similar experience s and ways that you accomplished sharpness in the final results. I was shooting with a 180 mm lens on a 5x7 camera.

    Many thanks in advance.

  2. #2

    Focus Delimma

    Tilt & stop down for depth of field. There are, however, situations where you can't get it all in focus. For example, if the near and far are very close in the image vs. at the edges.

    There are split filters to help in this situation.

    The other option is a pin-hole lens. Overall, not as sharp as glass optics, but equally sharp at all distances (more or less).

  3. #3

    Join Date
    Jun 1999
    Posts
    133

    Focus Delimma

    I asked a somewhat similar question recently and you might want to refer to the archives to see if any of the more detailed answers will help. I basically got three opinions. 1. Tilt and stop down (sounds like you may need to stop own a lot in a situation like this), which is what I tend to do. 2. Use no tilt at all. 3. Certain situations are beyond the limits of the camera for decent resolution - recompose. There is a similar example of this in John Fielder?s "Photography and the Art of Seeing", where he applies forward tilt and stop down method. The question remains with me, how much to stop down and still have optimum resolution? (I'm not sure where a split filter would address this).

  4. #4

    Focus Delimma

    Tilt UP! That aims the wedge of sharpness DOWN into your scene. Typically (if there is such a thing) you and your camera are on the ground trying to focus on things along the ground and sticking out of the ground like nearby rocks or trees and distant peaks. So you tilt down and the wedge of sharpness comes up out of the ground under your tripod and hopefully is wide enough to scoop up the tall things in the foreground as well as the base of the peaks. Your situation, which is not uncommon in my experience, is the reverse in that you're looking down. So tilt up. The wedge of sharpness then originates above your head and the dilemma is to encompass the short things in the foreground with tall things (peaks in this case) in the background.
    John Hennessy

  5. #5

    Join Date
    Jan 2001
    Posts
    128

    Focus Delimma

    Michael:

    John has hit the nail on the head with his discussion of the wedge. If you would like a more in-depth explanation of this concept, go to http://fox.nstn.ca/~hmmerk/. At this website, Merklinger goes into the mathematical details involved in working with tilts, swings, and f/stops to control depth of field. There are some good active examples of what happens.

  6. #6

    Focus Delimma

    Alternatively, get yourself a Rodenstock depth of field/schiempflug calculator. I have used this little gizmo for a while and has made my life much easier. As John stated the tilt should be UP and is easily seen in the calculator where it asks you for the angle from near to far plane. If horizontal is 0 then any neg angles should have you tilting up.

  7. #7
    Robert A. Zeichner's Avatar
    Join Date
    Feb 1999
    Location
    Southfield, Michigan
    Posts
    1,129

    Focus Delimma

    I believe you have identified your problem in the body of your question. It has to do with how far away various objects are from the re-established plane of focus, which you did when you tilted the camera back. Without any movements, the most distant object from the film plane was the mountain in the background, the nearest being the rock. When you focus on an object (or imaginary point) that is half the distance from the mountain as it is from the rock, you can calculate the aperture needed to achieve the needed depth of field and shoot. The problem is you probably won't have an aperture small enough to do this. If you did, you wouldn't be satisfied with resultant sharpness due to diffraction artifacts. The alternative would be to re-establish a focus plane that would reduce the delta or difference in position of the front standard to bring near and far in focus. If you were to pick a point roughly 1/3 down the top of the mountain and use it and a similar point 1/3 down from the top of the rock as your reference points for establishing a new plane of focus, you will notice that optically, the most distant object in the scene are those confounded trees. They should be within an acceptable range in which you can achieve decent focus by using an appropriate aperture. Why the 1/3 down the mountain business? You have twice the depth of field behind the focus plane as in front. Behind are those trees, in front are the tops of the rock and mountain. This is a whole lot easier to diagram than explain in words, but if you think about it a bit, it may make sense. I hope this helps in some small way.

  8. #8
    Peter De Smidt's Avatar
    Join Date
    Jan 2001
    Location
    Fond du Lac, WI, USA
    Posts
    8,954

    Re: Focus Delimma

    Decide what's most important. Make that sharp. Lot's of people get stuck on having everything in focus. It doesn't have to be, but if it absolutely has to be in the given situation, then take two pictures, focusing on each major element separately. Combine in printing or digitally.
    “You often feel tired, not because you've done too much, but because you've done too little of what sparks a light in you.”
    ― Alexander Den Heijer, Nothing You Don't Already Know

  9. #9
    ic-racer's Avatar
    Join Date
    Feb 2007
    Posts
    6,736

    Re: Focus Delimma

    Stop down. Some great photographs have been made at f90 in 8x10.

  10. #10
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,384

    Re: Focus Delimma

    Resurrected by the always elusive hornstenj

    hornstenj deletes every post It makes in moments

    Perhaps a Destroying Angel AI
    Tin Can

Similar Threads

  1. How to focus a soft focus lens
    By Geoffrey_1456 in forum Lenses & Lens Accessories
    Replies: 37
    Last Post: 27-Dec-2023, 04:29
  2. Out of focus
    By Ross Schuler in forum Cameras & Camera Accessories
    Replies: 11
    Last Post: 27-Feb-2002, 13:37
  3. 4x5 focus?
    By Joe Tasse in forum Style & Technique
    Replies: 6
    Last Post: 19-Jan-2001, 06:33
  4. How to focus a soft focus
    By Dean Lastoria in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 25-Jul-2000, 01:32
  5. Max. f = better focus?
    By Robert Anderson in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 17-Jun-1999, 16:41

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •