Results 1 to 4 of 4

Thread: Toyo 45G missing piece of back?

  1. #1

    Join Date
    Oct 2008
    Posts
    1

    Post Toyo 45G missing piece of back?

    I picked up (some) of a Toyo 45G on e-bay (of course) which arrived last week. I'm a bit confused though with regard to the back. I think some of it is missing.

    There was no ground glass with mine and while I can find cheap (crap?) ones on e-bay I'm not entirely sure how it would even attach. Mine is the 360 degree revolving back.

    This is a photo taken by the seller: http://i22.ebayimg.com/06/i/001/1d/93/1b16_3.JPG

    Here is one from a different one for comparison: http://img.photobucket.com/albums/v2...hot_03_124.jpg

    The manual shows the 'focussing frame release' (wording from the manual) but it doesn't appear on mine (reasonably clear when the two images above are compared).

    Am I missing a crucial piece? Having reviewed 'Using the View Camera' it seems most likely, as if I could attach a film holder, I'd still need the ground glass removed (as it'd be on the wrong side of the holder (i.e. between the film and the lens).

    If I am missing a piece, do you know what it is called and if I'm likely to be able to get it? I've been searching for information today but to no avail. I've only seen full revolving back 'kits' (which ambiguous pictures showing only the back of the piece I have) which cost far more than the camera.

  2. #2
    Octogenarian
    Join Date
    Sep 2003
    Location
    Frisco, Texas
    Posts
    3,526

    Re: Toyo 45G missing piece of back?

    Looks like the camera is missing the entire ground glass frame, as well as the ground glass, itself.

    Look for a junker Toyo/Omega D,E,F, or G model. They all use the same type of ground glass frame. It's readily removable and easily attachable without tools. Purchasing a new replacement part (if still available) would probably cost more than the price of the entire camera.

  3. #3
    Moderator Ralph Barker's Avatar
    Join Date
    Sep 1998
    Location
    Rio Rancho, NM
    Posts
    4,924

    Re: Toyo 45G missing piece of back?

    The Toyo revolving backs are made in what might be called two "layers". The base layer attaches to the camera back and has the Graflok bars, and the top layer has the ground glass and film holder section. The first (seller's) image has only the base, Graflok layer.

    You might watch KEH listings, or check with MPEX for a spare Toyo back standard. I bought one from KEH a while back for around $80, as I recall.

  4. #4
    Large Format Rocks ImSoNegative's Avatar
    Join Date
    Oct 2008
    Location
    McCaysville Georgia
    Posts
    1,600

    Re: Toyo 45G missing piece of back?

    I have a 45gII that has the same back, those 2 long lever looking things on the back, (one above the GG and one below) are actually like buttons, you push both of those while sliding the back off. I have to do that everytime i use my film back, very easy to take off and put on.
    "WOW! Now thats a big camera. By the way, how many megapixels is that thing?"

Similar Threads

  1. Toyo 45AX extension back
    By Ralph Barker in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 29-Aug-2008, 10:05
  2. Anyone Make Wood Backs for Size of Preference? Will be for Arca Swiss...
    By audioexcels in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 7-Nov-2007, 19:42
  3. 6x12 back, Linhof vs. Sinar vs. Horseman, any opinions
    By Bill Glickman in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 20-Apr-2000, 08:19
  4. Extension back for Toyo AII
    By Jeff Liao in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 7-Oct-1999, 10:58
  5. Roll film back: horseman vs toyo
    By Yong-ran Zhu in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 13-Nov-1998, 13:35

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •