Hi folks,
Here's a (hopefully simple) question. Yes, I've checked as far as Google's usen et search and this board's archives and graflex.org and .. will take me, but cou ldn't find the answer readily.
I have a Pacemaker Graphic 4x5 with a Graflok back. I might also have the oppor tunity to obtain a Graphic "22" knob-wind 6x6 back with 4x5 mounting plate.
The question: if I remove the Graphic "22" knob-wind back from the adapter plate and try to put a Mamiya RB 6x7cm roll back on, will the adapter hold it? I kno w the RB back has Graflok-like slots on it (so if I had a 2x3 Graphic it would f it right on), but I'm not sure:
a) whether the RB back will fit lighttight and hold on the adapter (or even if t he "22" roll back will come off);
b) whether the opening in the plate for the roll back is big enough to let 6x7cm through.
Thanks; hopefully you've figured out by now that a RB roll back's film transport is preferable to the older "22" rollback's technology, which is why I'm even th inking about this in the first place! (and I will echo the many folks who prais e this forum: amazing insights and info here.)
Bookmarks