Results 1 to 10 of 10

Thread: Help - T-MAX Pro Developer and Sheet Film

  1. #1

    Join Date
    Mar 2008
    Location
    Whitby, Ontario
    Posts
    5

    Help - T-MAX Pro Developer and Sheet Film

    I used D-76 with hangers and rubber tanks to do my last (My First actually!) set of 4x5 sheets. Aside from mixing up a larger quantity with the powders and waiting to cool down - the process went well for my first try - all done in the dark.

    I've recently acquired a Unicolor drum/base which uses very little chemistry per my research and I can do it in the light. This would be ideal for me right now as I can test a few shots at a time and adjust my shooting style and I wouldn't have to do a large batch at once. I'd also like to test different emulsions to see how they look aswell - I've got some Tri-X, T-Max 100, 400, and some of the Shanghai 100.

    So I thought I'd try the T-Max Pro Developer (Non RS) since it would allow to mix asmuch as I need. I have 2 bottles of it to try out.

    Now on the Kodak Tech Bulletin J-86 it states its only for roll film and not to be used for sheet film. Is their a reason for this - it doesn't say why in the bulletin.
    It recommends the RS for the sheet film - once again, it doesn't say why that is preferred over the other.
    I don't understand why the chemistry would be different - film is film, no matter what size - isn't it?

    Has anyone tried T-Max Pro with drum processing? What were the results - good, bad? What should I expect if I do go ahead and use it? Should I adjust the concentration of the final working solution?
    I'll probably use about 250-300ml with 4 sheets in the drum and cut back time by 10-15% for the given emulsion.

    I don't have the T-Max Pro RS and I don't really want to reuse developer and keep track of replenisher, usage and number of sheets done, etc..

    Any Help would be appreciated (before I sacrifice some sheets!) Any thoughts?

  2. #2

    Join Date
    Aug 2004
    Location
    New Hampshire
    Posts
    482

    Re: Help - T-MAX Pro Developer and Sheet Film

    Yes, film is film, but films differ and TMax RS developer is the one for sheet film. I forget the specific issue, but there is a problem that occurs with sheet film and non RS. For some reason I think it's some surface fog or dichroic fog, or a nasty coating that gets on sheet film when using T-MaxDev - not RS .... but don't quote me on the details...

    C

  3. #3

    Join Date
    Feb 2005
    Posts
    2,955

    Re: Help - T-MAX Pro Developer and Sheet Film

    As CG said, T-Max RS, not T-Max, is the one Kodak recommends for use with sheet film.

  4. #4
    Just waiting to be developed..
    Join Date
    Feb 2007
    Location
    New Rochelle, NY 10804
    Posts
    501

    Re: Help - T-MAX Pro Developer and Sheet Film

    I remember something about it, but for me it doesn't exist.
    I use a PhotoTherm SSK rotary tube. The recommended standard developer for it is Tmax 1:5. Not the RS version.
    I use the SSK for all of my 4x5. Tmax 100-400, TriX, HP5 and ERA.
    It works really well. No additional fog and no goop.

    It might be the continuous agitation that keeps things normal?
    -Ian Mazursky
    www.ianmazursky.com Travel, Landscape, Portraits and my 12x20 diary
    PrePress Express

  5. #5

    Join Date
    Mar 2008
    Location
    Whitby, Ontario
    Posts
    5

    Re: Help - T-MAX Pro Developer and Sheet Film

    Thanks for the feedback guys.

    Looks like I may be risking it on the shots I have - but I may have to try it on a couple of test shots. Perhaps it may be fine with the Shanghai film as I've been told its a thinner base.

    Ian, I'm just wondering if the constant agitation in the rotary drum helps overcomes the fogging issue compared to dunking and tray development?
    I guess its time to sacrifice some test shots. Will let you know the results.

    Cheers.

  6. #6

    Join Date
    Sep 1998
    Location
    Mobile, AL
    Posts
    552

    Re: Help - T-MAX Pro Developer and Sheet Film

    Tmax sheet film is susceptable to chromagenic stains when developed in the regular Tmax developer. I had used the regular Tmax developer with a beseler drum and never experienced the staining but didn't want to chance it. So I switched to the Tmax RS. I'd rather be safe than sorry. You know Murphy's Law and it will strike on one of your prized exposures.

  7. #7
    ic-racer's Avatar
    Join Date
    Feb 2007
    Posts
    6,737

    Re: Help - T-MAX Pro Developer and Sheet Film

    For the last year I have used the non-RS T-max developer for rotary processed 4x5 with excellent results. Not a recommendation, just stating my experience.

  8. #8
    grumpy & miserable Joseph O'Neil's Avatar
    Join Date
    Feb 2004
    Location
    London, Ontario
    Posts
    830

    Re: Help - T-MAX Pro Developer and Sheet Film

    Regardless of which developer you use, when you go from tanks and hangers (or tray processing) to rotary, it changes a few things, and this is true for all B&W films and developer combinations.

    My thought is for you to deliberately "waste" a few sheets or shots. For example, the constant agitation of a rotary drum can increase contrast as compared to hanger & tank development. This can be compensated for by using a water pre-soak, cutting back on developing times or adjusting the weakness/strength of your developer.

    So go have some fun and experiment. Good luck
    joe
    eta gosha maaba, aaniish gaa zhiwebiziyin ?

  9. #9

    Join Date
    Sep 2006
    Posts
    377

    Re: Help - T-MAX Pro Developer and Sheet Film

    I also use the Phototherm SSK rotary processor and I started by using the regular TMax developer 1+5 and I DID get some dichroic staining. I switched to the RS version with excellent clean results.

    Perhaps the water composition and other variables make a difference?

    Phil

  10. #10
    Just waiting to be developed..
    Join Date
    Feb 2007
    Location
    New Rochelle, NY 10804
    Posts
    501

    Re: Help - T-MAX Pro Developer and Sheet Film

    Hi Phil,

    Maybe its the water? I use tap! New Rochelle has really good drinkable water and i have never had any problems with it in my chemistry. Damn, now i know i will have problems!

    I do use a pre soak in the processor.

    Do the times in the SSK differ for Tmax RS? and do you mix it 1:5?
    I only ask because i have 8 boxes of the stuff hanging around.
    -Ian Mazursky
    www.ianmazursky.com Travel, Landscape, Portraits and my 12x20 diary
    PrePress Express

Similar Threads

  1. ilford delta 100 sheet film (kodak developer)?
    By gary in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 7-Feb-2006, 15:53
  2. Best suited developer for PlusX sheet film
    By J.R. in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 21-Oct-2005, 21:05
  3. Old Formulas : Film
    By Paul Fitzgerald in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 19-Mar-2005, 21:31
  4. Which developer works best with Tri-X 8x10 sheet film???
    By ric YAMA in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 26-Nov-2001, 21:39
  5. What developer works best with T-Max 400 sheet film with rotary processer?
    By ric YAMA in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 24-Nov-2001, 00:56

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •