Quote Originally Posted by mhphotography View Post
did any cezanne user try to connect a second device on the SCSI interface of the cezanne? If yes, do you need to turn on the cezanne when using the second device
Hi . . The SCSI is standard, with the SCSI ID set at '6' for the scanner (at the rear of the scanner . .). . .
Therefore you will be able to connect another device as long as the terminator is fitted at the furthest point. . . and not using SCSI ID '6'.
(Maybe have the scanner at the furthest point . . .) . . .Also, watch out for cable lengths . . !!

Hope this helps . . .
Tony