Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: grainy when focusing on g.g.

  1. #1

    grainy when focusing on g.g.

    So I finally have acquired all the equipment to start, when I focused the pictur e on the g.g. and used my loupe to check the g.g. everything seems grainy. Is t his normal?

  2. #2

    grainy when focusing on g.g.

    Julie: What you are seeing is grain of the ground glass. That is normal. You won't be able to focus without the grain of the glass. It is where it is etched or ground to make a focusing screen. Some ground glasses use a quite coarse screen, some finer. The image seems to snap into focus quicker with a course grind, but may not be the best solution for really fine focusing or for a higher magnification loupe.

    Regards,

  3. #3

    Join Date
    Nov 1998
    Posts
    339

    grainy when focusing on g.g.

    You're probably using a loupe that has too much magnification; 4X is about right .

  4. #4

    grainy when focusing on g.g.

    If you find the grain annoying, you can purchase another g.g. - find out where Dick Phillips get's his made as the company seems to do really realy good work.

    Another option is to buy a can of varnish or laquer (I can never remember which - perhaps someone with more wood working background than I can respond) and take some maksing tape and tape out a pattern on the ground side of the glass that you find acceptable.

    Then paint the varnish or whatever, on the ground side and let it dry. It will leave a fairly clear area - not as clear as clear glass - but close enough - that you can use to foucs with.

    This is how the original Deardorff g.g.'s were made.

  5. #5

    Join Date
    Dec 1997
    Location
    Baraboo, Wisconsin
    Posts
    7,697

    grainy when focusing on g.g.

    The only (to my knowledge) "grainless" focusing screen is the Bosscreen imported by Bromwell Marketing. It uses a wax layer in between the two sheets of glass and you can focus without seeing any grain. They are fairly expensive - around $150 for mine as I recall - but are well worth it IMHO. Sorry I don't have a URL for Bromwell but they advertise in Shutterbug and perhaps someone else can provide a URL or another source.
    Brian Ellis
    Before you criticize someone, walk a mile in their shoes. That way when you do criticize them you'll be
    a mile away and you'll have their shoes.

  6. #6

    grainy when focusing on g.g.

    One of the most common mistakes when focussing on a ground glass is to use a loupe which actually magnifies too much the coarse structure of any frosted glass, never exceed 4X it will do a better job than a 8X(7x) or even worse 10X (ever wonder why the most expensive loupes are 4x or 5x?). Bosscreen is a superior dutch product which has the only handicap of being sensitive to high temperatures, it is made of a thin coat of bee-wax and paraffin enclosed between two pieces of glass) spectacularly clear and great performance on wideangle too! B.T.W. If you want you can order direct at stabilix and save a lot of money (the actual price is H.f.l. 140 + taxes and sending). Enjoy!

  7. #7

    grainy when focusing on g.g.

    Now you have me worried. I'm only using a 4x toyo, fixed focus loupe. Maybe it is the gg is old, needs replacing? What do you think? It is a gandolfi 5x7 older model precision.

  8. #8

    grainy when focusing on g.g.

    One more vote for the Stabilix Bosscreen! Excellent and cheap enough if you get it from the manufacturer. More, they will cut it to your particular camera sizes. The great advantage besi des a grainless structure, is that it does not need as much shading from ambient light as normal ground glasse s when you go for the focussing step. You can do it in the open! I use one on a Linhof, with an excel lent Horseman Fresnel and it's amazing how much better this is from the standard GG I have on an other camera. One thing to be aware of is the relative sensibility to temperature extremes of this parrafin based sandwich . It should not be exposed to too high temperatures, as stated above, nor to too cold temperatures either. Min e started showing some tiny bubbles. I have been told putting it in a warm environment and gently pressing o n it will fix this.

  9. #9

    Join Date
    Nov 1998
    Posts
    339

    grainy when focusing on g.g.

    OK, your old groundglass may be dirty and not very bright.

    The first step imho should be to contact Gandolfi (or a Gandolfi dealer) and f ind out if they offer a newer, brighter groundglass, which also may have a finer surface. Of course using a slow lens makes the groundglass appear dimmer and gr ainier too.

    It's normal to see groundglass grain; what I meant about a too-strong loupe is that the grain is magnified so much it interferes with focusing.

  10. #10

    grainy when focusing on g.g.

    Gandolfi, will probably offer either a Beattie bright screen or a Bosscreen and charge you a lot more than buying directly from this company. By the way, do you use a fresnel lens too? Have you problems any special relation to use a combination of Wideagle (around maximum aperture f8 perhaps) and fresnel? This can all be factors which could impair the use of the best ground glasses, mind you, bosscreen i relatively better than most but cannot do miracles. Anyway! Order direct their telephone is +31 (0)70 3970061 the company name is Stabilix in The Hague (nl)

Similar Threads

  1. focusing
    By Jerry Cunningham in forum Style & Technique
    Replies: 2
    Last Post: 25-May-2005, 10:24
  2. grainy FP4 in ID-11 1:1
    By Zsolt Kis in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 23-Aug-2004, 14:10
  3. Replies: 1
    Last Post: 23-Oct-2001, 10:52
  4. GG focusing tip!
    By Richard Boulware in forum Location & Travel
    Replies: 5
    Last Post: 4-Sep-2001, 23:27
  5. focusing
    By Raven Garrow in forum Style & Technique
    Replies: 1
    Last Post: 22-Apr-1999, 04:26

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •