Results 1 to 6 of 6

Thread: Drums and Rotators

  1. #1

    Drums and Rotators

    I have read and learned a lot about peoples' opinions regarding the various drum s and rotators on the market...but a couple of questions remain:

    - I have not heard anything regarding the Beseler Color Print Processing Drum (1 1x14 to fit 4 4x5s). Does anyone have an opinion? How does it rate compared to the other drums?

    - Similarly, any comments on the Beseler Motor Base Agitator? Would the Jobo ex pert drums fit on this model?

    Thanks, and I look forward to the responses.

  2. #2

    Drums and Rotators

    Go here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003xuw

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003iq2

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003fAK

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003Lop

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003AQL

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=0035ID

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=002uec

    & here:http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=002PGg

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=002OVx

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=001OvU

    & here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=000lP4

    & even here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=0007hz

    and I'm sure there are a few I missed

  3. #3

    Drums and Rotators

    Sean - thanks for all the links. I don't know if you posted them as "hot" links (I didn't see them as such), but they don't work if you copy and paste them as is. You have to remove the space between the question mark and the msg_id. For example, this:

    http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=0007hz

    becomes

    http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl?msg_id=0007hz

    BTW, is there a database search function for this message board? Maybe I'm looking right at it and don't see it.

    Thanks again - Kevin

  4. #4

    Drums and Rotators

    I didn't do 'em "hot" cause I don't know how. Must edyewkayt muhsef! I noticed there was something odd about them when I tried cutting and pasting to the address bar from the post, but couldn'f figure it out. Thanks for the diagnosis. Don't know why copying them from the address bar did that.

    Unfortunatley the only way to search the archives is the ol' fashioned way - wunatatime.

  5. #5

    Drums and Rotators

    Hey folks,

    I found this info at the jobo website:

    http://www.jobo-usa.com/faq/drums_on_motorbase.htm

    http://www.jobo-usa.com/faq/print_vs_film_in_drums.htm

    http://www.jobo-usa.com/faq/film_tanks_vs_print_drums.htm

  6. #6

    Join Date
    Nov 1999
    Posts
    43

    Drums and Rotators

    For the archives:

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003xuw">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003xuw</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003iq2">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003iq2</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003fAK">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003fAK</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003Lop">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003Lop</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003AQL">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003AQL</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=0035ID">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=0035ID</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002uec">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002uec</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002PGg">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002PGg</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002OVx">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002OVx</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=001OvU">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=001OvU</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=000lP4">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=000lP4</a>

    <a target="_blank" href="http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=0007hz">http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=0007hz</a>

Similar Threads

  1. Jobo drums
    By JackG in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 6-Feb-2006, 14:14
  2. expert drums
    By chris jordan in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 18-Jun-2005, 23:35
  3. beseler drums
    By Robert Musgjerd in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 3-Sep-2004, 09:08
  4. Processing drums
    By Curtis Nelson in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 11-Mar-2004, 18:39
  5. Are there different Unicolor drums?
    By David Willis in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 11-Apr-2001, 23:55

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •