Results 1 to 7 of 7

Thread: Emile Busch WA brass lens looks like "hypergon"

  1. #1

    Join Date
    Feb 2007
    Location
    Paris EU
    Posts
    1,050

    Emile Busch WA brass lens looks like "hypergon"

    Do anyone of you fellows know anything about an Emile Busch Rathenow "Pantoscop","Pneussen" lens ?
    I have try it on my 8x10 and it covers well. It seems to be a 165 mm (mesuring from sceen-glass to iris plan).
    The design looks like the Wisner Hypergon and have very clean and clear glasses.
    No shutter, f stops from 1 to 5 are small flat elements with different holes sizes that one can slide in between front and rear glass elements.
    Thank you for giving some information

  2. #2
    All metric sizes to 24x30 Ole Tjugen's Avatar
    Join Date
    Mar 2002
    Location
    Norway
    Posts
    3,383

    Re: Emile Busch WA brass lens looks like "hypergon"

    The Pantoskop is an early superwide, somewhat similar to the Harrison Globe lens. Unlike the Hypergon the Pantoskop has two cemented elements in each end. It is said to be completely free from astigmatism out to an 80 degree image angle at f:25, and the total coverage at smaller sops should be more than 100 degrees.

    Your 165mm should cover 30x40cm if needed...

  3. #3

    Join Date
    Feb 2007
    Location
    Paris EU
    Posts
    1,050

    Re: Emile Busch WA brass lens looks like "hypergon"

    Thanks for your clear explanation.
    Is there any literaure about this subject ?

  4. #4
    All metric sizes to 24x30 Ole Tjugen's Avatar
    Join Date
    Mar 2002
    Location
    Norway
    Posts
    3,383

    Re: Emile Busch WA brass lens looks like "hypergon"

    In this case I consulted Kigslake: "The History of the Photographic Lens", Hans Schmidt: "Photographisces Hilfsbuch für ernste Arbeit", David "photographiscess Praktikum" and Wilkinson & Clanfield: "a lens collector's vade mecum". There are lots of literature - som old (1910), some newer (1990), some good, some not-so-good. This one was fairly easy to find references to - it's an historically important lens, and could well be claimed to be the first anastigmat. Not bad for 1865! It was also in production until after 1910.

    BTW - yours is likely to have been made no later than 1871, since it's marked "Preussen" ("Prussia"). But Busch may well have used that designation after the unification too...

  5. #5

    Join Date
    Feb 2007
    Location
    Paris EU
    Posts
    1,050

    Re: Emile Busch WA brass lens looks like "hypergon"

    Wow ! I never thought that this construction can be implicated in so much interesting history.
    Glad to learn about all these, Ole.

  6. #6

    Re: Emile Busch WA brass lens looks like "hypergon"

    Quote Originally Posted by Miguel Coquis View Post
    Do anyone of you fellows know anything about an Emile Busch Rathenow "Pantoscop","Pneussen" lens ?
    Puh!

    I'm almost shure it reads "Preussen" (Prussia). Without going into the details
    of Prussia's history the lens was probably made before 1871, in any case
    before 1919.


    Helmut

  7. #7
    All metric sizes to 24x30 Ole Tjugen's Avatar
    Join Date
    Mar 2002
    Location
    Norway
    Posts
    3,383

    Re: Emile Busch WA brass lens looks like "hypergon"

    It must be before 1904, since Emil Busch used "ROJA" instead of or in addition to the "E. Busch" on the lenses from that time.

Similar Threads

  1. Trousse Parisienne Casket Lens Set
    By John Downie in forum Lenses & Lens Accessories
    Replies: 13
    Last Post: 14-Jun-2014, 18:32
  2. LF lens manufacturer philosophy
    By Chris Bitmead in forum Lenses & Lens Accessories
    Replies: 23
    Last Post: 8-Oct-2007, 01:12
  3. B&L Tessar IIb "6-1/2 x 8-1/2" barrel lens
    By Doug Kerr in forum Lenses & Lens Accessories
    Replies: 6
    Last Post: 13-Feb-2007, 00:52
  4. Wide Angle Brass Lens for 13x18cm?
    By Cynan in forum Lenses & Lens Accessories
    Replies: 9
    Last Post: 7-Feb-2007, 11:28
  5. How to picture an enlarging lens in practice?
    By John D Gerndt in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 2-Jan-2004, 11:52

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •