Results 1 to 5 of 5

Thread: Tmax 100 - Green Tint?

  1. #1
    William D. Lester
    Join Date
    May 1999
    Ontario, Canada

    Tmax 100 - Green Tint?

    I've been developing sheet films for some time . I have used Tmax 400, Tri-x, FP 4 etc. for years. Lately I decided to try Tmax 100. The films have a distinct gr een cast when developed. I have not seen this problem with roll film or any othe r sheet film I use. I use the same chemistry - pre wet, Xtol, Kodak Indicator St op Bath, Ilford Universal Fixer, rinse, Kodak Hypo Clearing Agent, wash & Photo Flo. Has anyone else seen this? Is it a problem?

  2. #2

    Join Date
    Dec 1997
    Baraboo, Wisconsin

    Tmax 100 - Green Tint?

    I see this fairly often after I put the negatives in a sleeve and then place them against a white background such as the back of a contact sheet. I don't think it's a problem. I posed a similar question to the large format newsgroup a while back. Someone explained what it was but unfortunately I've forgotten. He assured me that it wasn't a problem so I've pretty much ignored it since. I get a similar "tint" with Ilford HP5+ sometimes also.
    Brian Ellis
    Before you criticize someone, walk a mile in their shoes. That way when you do criticize them you'll be
    a mile away and you'll have their shoes.

  3. #3

    Join Date
    Jan 2000

    Tmax 100 - Green Tint?

    Bill, I've processed Tmax 100 several times and the negatives always looked normal. The only thing I do different is a water rinse instead of stop bath.

  4. #4

    Tmax 100 - Green Tint?

    we went on avacation out west many, many years ago. dad put the film in the trunk just behind the rear seat. was very hot there.. when he got the film back it was all very green(ruined).. good luck ffffg....

  5. #5

    Join Date
    Aug 2000

    Tmax 100 - Green Tint?

    Bill, Try a 2 - 5 minute pre-soak in LFN, or Zonal Pro Archival Rinse, not Kodak Photo-Flo, then develop, water rinse, fix for double your current time, wash and end with another one minute in a fresh batch of the same wetting agent you used for the pre-soak. Contained in this are three things each of which will help solve the problem and combined you should never see the remains of the anti-halation layer again. Jim

Similar Threads

  1. tint on tranny
    By Gari in forum Darkroom: Film, Processing & Printing
    Replies: 0
    Last Post: 16-May-2005, 15:31
  2. TMax 100 and TMax R developer
    By Artie_1832 in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 9-Oct-2003, 10:30
  3. The Greenish Tint of Azo
    By Jeff Buckels in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 6-Apr-2001, 20:05
  4. green tint on negative
    By Robert Choi in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 1-Jan-1999, 13:58
  5. Green Filter (#58)
    By Robert Ruderman in forum Gear
    Replies: 3
    Last Post: 8-Sep-1998, 19:51


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts