Results 1 to 10 of 10

Thread: Shen Hao and sheet film holders

  1. #1
    45-57-617
    Join Date
    Oct 2006
    Location
    Toowoomba, Queensland
    Posts
    645

    Shen Hao and sheet film holders

    Hi all,

    I've just taken delivery of my first LF camera. It is a Shen Hao. How it is supposed to hold a sheet film holder beats me. It does accept the Chinese roll film holder by using the slider.

    I'll try to include some pics so that you can see my problem.

    As you can see, the Fidelity film holders do not have a screw in the side of them. The ground glass that came with the camera does have the screw in the side.

    Am I missing something ? Which sheet film holder has screws in the side ?

    Cheers for your help guys,

  2. #2
    tim atherton's Avatar
    Join Date
    Jul 1998
    Posts
    3,697

    Re: Shen Hao and sheet film holders

    if it's like every other camera, the back with the glass in it is spring loaded. You don't remove it to put in the holder

    Facing the back, you just put your fingers behind those two knobles of wood on the right hand side of the ground glass, pull them gently towards you half an inch, then slide the fim holder in from the right until it seats. It is then in the back of the camera, with the ground glass frame between you and the film holder

    make sense?
    You'd be amazed how small the demand is for pictures of trees... - Fred Astaire to Audrey Hepburn

    www.photo-muse.blogspot.com blog

  3. #3
    Robert Oliver Robert Oliver's Avatar
    Join Date
    Apr 2006
    Location
    Shell Beach, CA
    Posts
    488

    Re: Shen Hao and sheet film holders

    I'm confused by your question.

    The ground glass frame is spring loaded and the film holder slips behind the ground glass. The spring loaded ground glass frame holds the film holder snug against the camera. You only take off the ground glass when you are using a graflok back item like a roll film holder.

    It would be a huge pain in the arse if you had to remove the ground glass every time you made an image.
    Robert Oliver

  4. #4
    tim atherton's Avatar
    Join Date
    Jul 1998
    Posts
    3,697

    Re: Shen Hao and sheet film holders

    different camera, but kinda like this (no need to used the fancy thumb and finger method - that's just because the back of the metal canham can be accidentally moved out of zero)



    the film holder just slides into that gap
    You'd be amazed how small the demand is for pictures of trees... - Fred Astaire to Audrey Hepburn

    www.photo-muse.blogspot.com blog

  5. #5
    45-57-617
    Join Date
    Oct 2006
    Location
    Toowoomba, Queensland
    Posts
    645

    Re: Shen Hao and sheet film holders

    Hi guys,

    The ground glass holder has no springs on it. Just a screw in the side as seen in the photo. The only other piece of metal in the GG holder is the two little pieces that hold the glass in the wooden frame.

    The flat spring steel that is used to tension it against the back has a slot which is used to accept the screw.

    The Fidelity sheet film holder simply falls out as there is nothing to hold it in place.

    Cheers,

  6. #6
    tim atherton's Avatar
    Join Date
    Jul 1998
    Posts
    3,697

    Re: Shen Hao and sheet film holders

    or check here (scroll down) - again, different camera, same principal - there's even a little video:

    http://www.artm-friends.at/rm/foto/lf-cameras.php
    You'd be amazed how small the demand is for pictures of trees... - Fred Astaire to Audrey Hepburn

    www.photo-muse.blogspot.com blog

  7. #7
    45-57-617
    Join Date
    Oct 2006
    Location
    Toowoomba, Queensland
    Posts
    645

    Re: Shen Hao and sheet film holders

    Hey!

    Thanks Tim, Thanks Oliver !

    The sheet film holder goes BETWEEN the GG holder and the back ! (I was thinking you'd be taking the GG holder off each time ...) I've been running up a phone bill trying to find someone to sell me some little scraps of Stainless Steel to make some re-engineered springs ...

    Ooooh la!

    God help the little screws in the wooden back. There seems to be PLENTY of tension on those little screws !

    Hmmm, at least I can take some photos now !

    You guys are a much appreciated bunch.

    Many regards.

  8. #8
    tim atherton's Avatar
    Join Date
    Jul 1998
    Posts
    3,697

    Re: Shen Hao and sheet film holders

    Quote Originally Posted by Steve McLevie View Post
    The flat spring steel that is used to tension it against the back has a slot which is used to accept the screw.
    ,

    those two flat steel springs ARE the springs - they hold the back in tensions against the film holder once it's inserted between the back and the camera.
    You'd be amazed how small the demand is for pictures of trees... - Fred Astaire to Audrey Hepburn

    www.photo-muse.blogspot.com blog

  9. #9
    naturephoto1's Avatar
    Join Date
    Jul 2006
    Location
    Breinigsville, PA
    Posts
    570

    Re: Shen Hao and sheet film holders

    Steve,

    The Shen, like other LF cameras uses a spring loaded back. In the horizontal position, the spring is normally on the left side and is opened on the right side. You pull the portion that is to the right of and in front of the ground glass toward (side toward the lens and your first photo) you and slide the double sheet film holder into the film gate. The film holder will slide in with the white portion of the film holder at the right side. Once loaded the dark slide would be removed from the side of the film holder facing the lens. Once the film is exposed, the dark slide is slid back into the sheet holder. The film holder would be flipped 180 degrees for the second image (again with the white portion of the holder to the right side). Again the dark slide would be removed to take the image on the sheet of film facing the lens. Again, the dark slide would be returned to the film holder after the film was exposed.

    Normally the dark slide is put in one direction indicating the film is unexposed while the other side is used to indicate the film is exposed. Since it is so long since I have used the standard holders (instead of the Kodak Readyload holder and Fuji Quickload film), I will defer to others as to which is the standard practice.

    When a vertical image is taken by the way, the rotating back of the camera has to be removed and relocked in position so that the film can be slid into the film gate from the top of the spring loaded back.

    Rich
    Richard A. Nelridge

    http://www.nelridge.com

  10. #10

    Join Date
    May 2006
    Posts
    234

    Re: Shen Hao and sheet film holders

    I think that the Shen's seem to come with a very tight spring back so it might be a bit confusing... it'll loosen up with time..

Similar Threads

  1. Where to install the fresnel on Shen Hao
    By Daniel_5275 in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 9-Dec-2005, 07:17
  2. Polaroid 545i doesn't fit Shen Hao 4x5
    By Nghi Hoang in forum Cameras & Camera Accessories
    Replies: 7
    Last Post: 5-Jun-2005, 12:48
  3. Shen-Hao TFC45-I = Ebony SW45 Clone?
    By Christopher Condit in forum Cameras & Camera Accessories
    Replies: 22
    Last Post: 1-Apr-2004, 16:31
  4. SHEN HAO 4x5 wooden camera: Love at first sight!
    By Geoffrey_1456 in forum Cameras & Camera Accessories
    Replies: 18
    Last Post: 25-Jan-2002, 14:17
  5. Tachihara or Shen-Hao?
    By Adrian Ng'asi in forum Cameras & Camera Accessories
    Replies: 8
    Last Post: 30-Dec-2001, 10:33

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •