Hi to you all new member here, first of all I have a shutter which mounts behind the lens. Which the lens is attached via a lens panel which sits into the shutter. I have never seen anything like this before. I'm not even sure who made it as it only has the letters LUO and a US patent number on it. Secondly my cable release's plunger only travells out approximately 13-14MM or just bit more than a half an inch. Having rougly measured from the socket to the firing lever when the shutter is tripped manually it looks like it needs around 21MM(It could be more?) To open the shutter fully-This can be done manually or by a lever which sits on top of the shutter mount, which is I think the viewing position, it has 3 settings in total. 1 is maybe 1/20th or 1/30th haven't tested it yet. 2nd is bulb and the 3rd is the viewing setting. I have attached a JPEG of the shutter anyone who can add details to the make and history etc-Also where its possible to find a cable release long enough to trip the shutter, would be very much appreciated.
Bookmarks