Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Age fog

  1. #11

    Join Date
    Sep 1998
    Location
    Oregon now (formerly Austria)
    Posts
    3,406

    Re: Age fog

    Bleach WILL affect the latent image. Check out SLIMT techniques, where a rehalogenating ferricyanide/bromide bleach is used to bleach the latent image contrastwise (works on film or paper). I've used it quite a bit for film to control contrast.

    It likely won't help much with age fog, as the bleach works fastest/strongest in the areas of most exposure and almost not at all in the potential low-density areas.

    A bit of BTA in the developer might help, but better is likely just to overexpose enough to get your shadows up out of the fog and then print through it later. This means rating your film slower. A test or two should tell the tale.

    Best,

    Doremus

  2. #12
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,465

    Re: Age fog

    NOS Plates and Film and paper

    are to be carefully used and shown

    regardless of format

    Please never throw out aged

    emusions

    I have been given a lot of it

    regardless of flaw
    Tin Can

  3. #13
    multiplex
    Join Date
    Feb 2001
    Location
    local
    Posts
    5,374

    Re: Age fog

    Quote Originally Posted by robotgoldfish View Post
    The original thought was to remove the metallic silver that "printed out " due to conditions. But that would include the latent image.
    But you could probably clean off the fog before exposer. Not worth the effort unless the film is irreplaceable.
    why not do a test and see if it works ? its just film and you never know, sometimes the internet is wrong it might have a different technique to bring it to the wrong concluding

    if you decide bleach isn't your thing try a developer that allows you to shorten the developing time and add a boost to contrast.
    PPF ( print plate film / Universal ) Developers do that. 2 of the ones I regularly use are Ansco 130 and D72
    ( Dektol these days is ... brown so I wouldn't recommend that ).
    The Ansco130 has Glyicin in it and the D72 doesn't so depending on where you are it might be difficult to locate Glycin,
    otherwise they are similar. Both you dilute for the time you are going to develop so 1:5 for 5 mins 1:10 for 10 minutes. &c,
    glycin likes it warm so develop everything at 72F, D72 normal 68, agitate like you would normal development,
    unlike what the internet might tell you there are no golf ball sized grain, it's sweet ...
    I typically do the 5 minute run if it's aged (all my film is expired ) or of unknown origin, found in a 70-100 year old box camera &c.
    I found a makes 5 gallon RedCan of GAF Universal propping up a window where I used to live, and it converted me, if you ever find THAT, you won't be sorry.
    I've never been able to find it since. Some suggest it's VIVADOL I've never used it so I don't know ...
    ... As Alan mentioned I am also a wicked fan of using Caffenol with either or those print developers mixed in.
    I usually mix the caffenol the tablespoon method and add about 15-20cc of stock undiluted print developer/L in there...unlike what the internet might say, exact measurements aren't critical ..
    doesn't matter the ISO brand, exposure color/E6/BW either .. whatever. , it usually looks great at about 10 minutes but that's me, your time for what you do will probably be different.
    the stain from the coffee and print developer eat through /mask the fog and create a sheen of it's own
    (some say caffenol is pyro's kissin' cousin ) with a boost of contrast from the PPF. they tend to print and scan like a dream ...
    if you hunt for the caffenol cookbook you will see recipes and examples of the film and prints made with it
    I was one of the authors ( the one who didn't use a scale ) and have been using it since around 2006,
    within the past few days I just developed paper negatives with it ( some are posted in the paper negative image sharing pages ) ..

    ( if you do a search on Flickr and probably instagram there are examples of film others have made using their own variety of caffenol ),

    sorry to sound like a used car salesman but feel free to PM me if you want some Sumatra whole bean robusta coffee; I dont' use instant anymore but roast my own and I seem to have a lifetime supply ...
    to use any bean coffee instead of instant, you brew a strong pot and add a little extra to the pot like you normally would ( or maybe that's just me? ),
    don't clear it with eggshells like church coffee ( I haven't tried that, maybe you do? who knows the albumen &c might do good things )
    ... I usually make 10 cups at a time every 6 months and I add vit c until it foams. I've been replenishing the same gallon+ batch for 2 years, still going strong...
    maybe your local robusta or arabica bean works as well too, not sure, might as well try it .. if you are in France look for an instant called "OLD GRINGO" it was at leclerk and it was cheep and fantastic,
    no washing soda, either use baking soda as is ( sorry I don't have the conversion factor one of the caffenol bloggers probably does ) or
    better yet, dry it out in your oven to convert it, vit c, the internet can help you cheaply... I get mine at Whole Foods or Trader Joes, it can't have other crap in it, like pectin it has to be only vit c..
    some caffenol users don't even bother with the soda or vit c and just use coffee and nothing else, seems to work well for them ...

    good luck!
    John

    <...> added later <...> I just remembered the caffenol cookbook website I think might be down
    here's a link to the cookbook >>>>. https://www.nanianphoto.com/blog/caffenol-cookbook/
    Last edited by jnantz; 13-Feb-2024 at 10:18. Reason: added link to caffenol cookbook just in case.. and refined my rant

  4. #14
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,465

    Re: Age fog

    your wall of words are impenetrable

    thank you


    Quote Originally Posted by jnantz View Post
    why not do a test and see if it works ? its just film and you never know, sometimes the internet is wrong because it might have a different technique

    if you decide bleach isn't your thing try a developer that allows you to shorten the developing time and add a boost to contrast. PPF ( print plate film / Universal ) Developers do that. 2 of the ones I regularly use are Ansco 130 and D72 ( Dektol these days is ... brown so I wouldn't recommend that ). The Ansco130 has Glyicin in it and the D72 doesn't so depending on where you are it might be difficult to locate Glycin, otherwise they are similar. Both you dilute for the time you are going to develop so 1:5 for 5 mins 1:10 for 10 minutes. &c, glycin likes it warm so develop everything at 72F, D72 normal 68, agitate like you would normal development, unlike what the internet might tell you, there are no golf ball sized grain, it's sweet ... I typically do the 5 minute run if it's aged (all my film is expired ) or of unknown origin. I found a Red Can of GAF Universal propping up a window where I used to live, and it converted me, if you ever find THAT, you won't be sorry. I've never been able to find it since. Some suggest it's VIVADOL I've never used it so I don't know ... As Alan mentioned I am also a wicked fan of using Caffenol with either or those print developers mixed in. I usually mix the caffenol the tablespoon method and add about 15-20cc of stock undiluted print developer/L in there... doesn't matter the ISO brand, exposure color/E6/BW whatever, it usually looks great at about 10 minutes but that's me, your time for what you do will probably be different. the stain from the coffee and print developer eat through /mask the fog and create a sheen of it's own (some say caffenol is pyro's kissin' cousin) with a boost of contrast. they tend to print and scan like a dream ... if you hunt for the caffenol cookbook you will see recipes and examples of the film and prints I make with it ( and examples of film others have made using their own variety of caffneol ), I was one of the authors ( the one who didn't use a scale ) and have been using it since around 2006, I just developed paper negatives with it the other day ( some are posted in the paper negative image sharing pages ) ..

    feel free to PM me if you want some Sumatra whole bean coffee I dont' use instant anymore but roast my own and I seem to have a lifetime supply ...
    to use the Sumatra or any bean coffee instead of instant, you brew a strong pot and add a little extra to the pot like you normally would ( or maybe that's just me? ), don't clear it with eggshells like church coffee ( I haven't tried that, maybe you do? the albumen might do good things ) ... I usually make 10 cups at a time and I add vit c until it foams. I've been replenishing the same batch for 2 years, still going strong, maybe your local robusta or arabica bean works as well too, not sure .. if you are in France look for "OLD GRINGO" instant it was at the leclerk I think and it was fantastic, no washing soda, either use baking soda as is ( sorry I don't have the conversion factor but you add extra ) or dry it out in your oven to convert it, vit c, the internet can help you cheaply...

    good luck!
    John
    Tin Can

  5. #15

    Join Date
    Jun 2005
    Location
    Denmark
    Posts
    239

    Re: Age fog

    Well, a fog horn will help.

  6. #16
    Drew Wiley
    Join Date
    Sep 2008
    Location
    SF Bay area, CA
    Posts
    18,377

    Re: Age fog

    There is more than one kind of age fog. I experience it every day, especially if I'm stuck indoors due to too much fog. But sunnier days are finally starting to arrive.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •