Does anyone have a drawing from Schneider showing the exact mechanical dimensions of the BKL-1 flange mount ?
I have a 210/5.6 Componon-S ( late model ) for which I need an adaptor plate for Durst, but I've looked through all the sheets and promo material I have from Schneider ( which is quite a lot ) but have no proper drawing of the BKL-1 critical dimensions, for example the radius/dia of the 4x hole drillings.
I can measure it ultimately, but wondered if anyone had something written down.
I've emailed Schneider, let's see if they can find the drawing.
No response from Schneider, but I solved the mystery in a different way.
I sat down and had a very close look at the lens just now. It turns out that this flange with the 4 countersunk holes actually screws onto a thread underneath and can be removed. A quick measure reveals that this is an M55 thread which makes sense now with respect to a lot of the documentation. Slightly easier to find/make an adapter for Durst, in this case.
Last edited by Mark J; 11-May-2023 at 05:48.
An engineer from Schneider did email me today, pointed out my mistake ref. the M55 thread, and gave me a drawing of the threaded flange anyway. Nice service.
Is there any way you can post the info you received from Schneider for others who might seek it now or in the future?
I've asked Steffen, I'll let you know.
If not, i will describe the key features in any case.
Here is the drawing.
I'll also write BL-1a here, I haven't really identified the name of this part for sure !
Posting Permissions
Reply With Quote
Bookmarks