Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Question about Linhof Kardan Bellows

  1. #1

    Join Date
    Jul 2020
    Location
    Canada
    Posts
    457

    Question about Linhof Kardan Bellows

    I got an old Linhof Bi Kardan recently, and it had an oddball bellows. It looks like a combination bag bellows and regular bellows, since it has the features of both.
    Click image for larger version. 

Name:	Linhof-Kardan-Bag-type-bellows.jpg 
Views:	6 
Size:	52.6 KB 
ID:	231778

    I actually have another one that I got years ago, but that one is badly deteriorated and unsalvageable. This one seems to be O.K., so I'll probably use it.

    My question is, what was this bellows intended for? I'm assuming it would be useful for short and standard focal length lenses, but maybe there was a special purpose. Should the bag portion be at the lens end or the back end?

  2. #2

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Question about Linhof Kardan Bellows

    That is the old design wide angle bellows. A few years later it was changed to just be a bag type.

  3. #3

    Join Date
    Jul 2020
    Location
    Canada
    Posts
    457

    Re: Question about Linhof Kardan Bellows

    Thanks, Bob. Do you know if the bag is intended to be at the front or rear?

  4. #4

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Question about Linhof Kardan Bellows

    Quote Originally Posted by sharktooth View Post
    Thanks, Bob. Do you know if the bag is intended to be at the front or rear?
    Rear, I believe. But go into a closet with it and stick a flashlight in it. It’s so old it will probably be full of pinhole light leaks.

  5. #5

    Join Date
    Jul 2020
    Location
    Canada
    Posts
    457

    Re: Question about Linhof Kardan Bellows

    I thought it was going to be bad when I got it, especially since the old one I had was completely rotted through. When I did the light test I was surprised that I didn't find any leaks at all. One side at the rear frame attachment had come free, but that was a simple fix with some contact cement.

    I've had bad luck with Linhof bellows from the 70's where the outer leather cracks leaving zebra stripes of the white stiffeners underneath. These can't be repaired at all. The older bellows from the 50's and 60's seem to be very long lasting, however. I'm guessing the stiffener material they used in the later models did not expand and contract in the same way that the outer leather did, and the leather became overstressed under certain environmental conditions.

  6. #6
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,387

    Re: Question about Linhof Kardan Bellows

    Chamonix puts the 'bag' close to front

    https://www.chamonixviewcamera.com/cameras
    Tin Can

  7. #7

    Join Date
    Sep 2022
    Posts
    32

    Re: Question about Linhof Kardan Bellows

    Quote Originally Posted by sharktooth View Post
    I got an old Linhof Bi Kardan recently,
    Hi,
    I am looking at one, but i am not sure if it is the Bi. The one I am looking at seems to be a mixture of Technikardan S 45 and re 45.
    Can you put a picture of it for me to be sure is the same one.
    Thanks.

  8. #8

    Join Date
    May 2012
    Location
    Jacksonville Florida
    Posts
    256

    Re: Question about Linhof Kardan Bellows

    I have the version that fits the old 5x7 Kardan. The leather bag part is thick leather that it light tight but the rest was beyond repair. I removed the bad part and glued a 4x5 frame to to piece of plastic placed inside the bag. Now it fits nicely to my 5x7 Kardan Bi for wide angle work.

  9. #9

    Join Date
    Jul 2020
    Location
    Canada
    Posts
    457

    Re: Question about Linhof Kardan Bellows

    Quote Originally Posted by many View Post
    Hi,
    I am looking at one, but i am not sure if it is the Bi. The one I am looking at seems to be a mixture of Technikardan S 45 and re 45.
    Can you put a picture of it for me to be sure is the same one.
    Thanks.
    Here's a link to a Bi Kardan from Laflex.
    http://www.laflexcamera.com/serviced...y-cla-serviced

    The Bi Kardan is easily identified since it has both base tilts and center axis tilts. That is the unique feature of the Bi Kardan, and what makes it "Bi"

  10. #10

    Join Date
    Sep 2022
    Posts
    32

    Re: Question about Linhof Kardan Bellows

    Quote Originally Posted by sharktooth View Post
    Here's a link to a Bi Kardan from Laflex.
    Thanks. Is different than the one I was looking for.

Similar Threads

  1. Replies: 12
    Last Post: 11-Jul-2017, 22:39
  2. 4x5 Linhof Kardan ST-E bellows
    By AlanS in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 7-Dec-2016, 12:18

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •