Results 1 to 3 of 3

Thread: Help with designing the installation of an Intellifaucet D250 mixing valve

  1. #1

    Join Date
    Jul 2006
    Location
    Collinsville, CT USA
    Posts
    2,330

    Help with designing the installation of an Intellifaucet D250 mixing valve

    I just received my Intellifaucet D250 from HASS Manufacturing. I am trying to figure out how to design its installation.
    1. Everything will be mounted on a 2 foot high by 4 foot wide 3/4 plywood board.
    2. I also purchased a pair of hot and cold water filters from HESS.
    3. I will be using 1/2" PEX piping.
    4. Hot and cold water coming from the ceiling in the upper left corner of the 2x4' plywood.
    5. Lower right of the 2x4' plywood will be a laundry faucet.
    https://www.amazon.com/dp/B0019716M4...roduct_details
    6. I want to have 2 separate faucets coming from the output of the Intellifaucet
    https://www.amazon.com/dp/B076FG5ZRN...t_details&th=1

    Any pictures of other FORUM member's installations would be most helpful to me.

    thanks

  2. #2
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,387

    Re: Help with designing the installation of an Intellifaucet D250 mixing valve

    I prefer PEX Bands with the special tool

    No galvanized or cast iron, use stainless

    Valves everywhere and 2 dead ends just in case

    I like a mix of brass gate and ball valves

    Here's my board, I made mistakes, as I ran out of money

    HASS 250 by TIN CAN COLLEGE, on Flickr
    Tin Can

  3. #3

    Join Date
    Jan 2013
    Location
    Madisonville, LA
    Posts
    2,412

    Re: Help with designing the installation of an Intellifaucet D250 mixing valve

    There is an entire thread on this:

    https://www.largeformatphotography.i...=intellifaucet

    L

Similar Threads

  1. Intellifaucet D250 mixing valve opinions wtd
    By Greg in forum Darkroom: Equipment
    Replies: 19
    Last Post: 5-Feb-2024, 17:10

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •