Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Jobo 3010 Expert Drum and B's Processor

  1. #11

    Re: Jobo 3010 Expert Drum and B's Processor

    Chamonix 45N-2, Chamonix 45H-1

  2. #12

    Re: Jobo 3010 Expert Drum and B's Processor

    Could the wait time between discarding the developer and putting the drum back on the motor base and pouring water(water stop bath) into the rotating drum cause any streaking or other problems?
    Thanks in advance.
    Chamonix 45N-2, Chamonix 45H-1

  3. #13

    Join Date
    Sep 2014
    Location
    Montreal, Canada
    Posts
    1,153

    Re: Jobo 3010 Expert Drum and B's Processor

    Quote Originally Posted by younghoon Kil View Post
    Could the wait time between discarding the developer and putting the drum back on the motor base and pouring water(water stop bath) into the rotating drum cause any streaking or other problems?
    Thanks in advance.
    I guess it depends on how fast or slow you complete that operation. Technically even if you have a Jobo processor with lift, this is still how it works. The lift disengages the drum from the motor, the liquid pours out, then you put the lift back down, drum starts rotating again and you pour the next chemical into the lift.

    In your case, take the drum off the rollers, empty it, put it back on the rollers. Same thing except you need to make sure you get the tripod/filling hose placed/inserted quickly so you can pour in the next chemical right away. Might take some practice and adjusting to make that part of the operation quick/smooth/easily repeatable, but worth the effort in my opinion if you can make it work.

  4. #14

    Re: Jobo 3010 Expert Drum and B's Processor

    Thanks for your help, appreciated.
    Chamonix 45N-2, Chamonix 45H-1

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •