I've had a lot of streaking, mottling, and edge density problems so far.
In the meantime, I learned how to use Jobo Expert Drum and Motor Base in this forum.
I made a drum supporting device like this.
And I developed several times with XTOL, and the scenes with a lot of clean skies were developed very evenly.
I got a lot of information from this forum. thank you!
p.s. When the 3010 drum is filled with 600mL solution and turned on with the original 12V/1A power adapter, the speed in one direction is about 20rpm and the speed in both directions(2 forward rotations, 2 reverse rotations) is about 18.5rpm.
Bookmarks