Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Bellows glue

  1. #11

    Join Date
    Mar 2005
    Location
    Newbury, Vermont
    Posts
    1,381

    Re: Bellows glue

    Combination of contact cement and screwed-on strips. Be sure that the contact cement layers are thin (but still viable) and even, as a "blob" of glue can transmit light! The screwed on strips can help mitigate this light-piping issue, as well as help to ensure that things don't get pulled apart as the bellows is stressed over time, by various movements, expansions/contractions, and environmental conditions.

    The aforementioned strips can be omitted...but if so, be sure to give the cement a week or so to cure more fully before putting any stress on the bellows. Sometimes, if a "strip-less" bellows begins to separate from one or both frames, the strips can (if design/mounting permits) be added at that point, with it being a 50/50 proposition as to whether you'll want to pull the bellows off and re-glue first. My advice is to first pull gently to test the old glue for resistance, because pulling too hard can tear the fabric and make a mess!

  2. #12
    Arca-Swiss
    Join Date
    May 2002
    Location
    Phoenix, AZ
    Posts
    212

    Re: Bellows glue

    Loctite 480 Black is also quite good for bellows attachment. Designed for porous material to metal or wood.

    Evostick is good as well. In either case, be sure to get adequate coverage on your frames.
    Rod Klukas
    US Representative
    Arca-Swiss International
    480-755-3364


    Digital Camera Solutions including R-series Technical Cameras, Large Format View Cameras and Ballheads. 480-755-3364

  3. #13

    Join Date
    Jan 2020
    Location
    near Prescott, Arizona
    Posts
    37

    Re: Bellows glue

    Quote Originally Posted by MichaelGJ47 View Post
    G’Day All
    I recently extended my bellows on my Burke & James 5x7 much longer than normal and the bellows pulled away on one side where it is glued to the front standard ,any suggestions as to what glue to use to repair this. I assume this is the original bellows and I hope to send it off to be replaced soon but in the meantime I would like to use it.
    Michael, I've used Permatex UltraBlack Gasket Maker, #82180, in a 3.5oz tube, with perfect results so far. Two years on the bellows frame that I glued back into place (after cleaning the glued surfaces well) has withstood a couple of dozen maximum extensions and many lesser extensions.

  4. #14

    Re: Bellows glue

    Well I ordered the glue on eBay.uk(evo stick) and it arrived today from the jersey islands and I have applied it and will let it set for a few days and see what happens.I was going to order it from the US but being in Canada the shipping cost USPS-was more than the glue.it took 9 days from the UK and shipping was a 1/3 of that from the US. Looking forward to using this camera.
    Thank everybody for the suggestions
    Michael

Similar Threads

  1. Glue For Bellows
    By JJLouis in forum LF DIY (Do It Yourself)
    Replies: 46
    Last Post: 19-Feb-2020, 20:49
  2. Need Bellows Glue
    By muskedear in forum LF DIY (Do It Yourself)
    Replies: 2
    Last Post: 5-Jun-2016, 17:41
  3. Bellows Glue
    By lenser in forum Gear
    Replies: 13
    Last Post: 7-Aug-2013, 18:09
  4. How to glue a bellows to frame?
    By Ginette in forum Gear
    Replies: 11
    Last Post: 9-May-2011, 01:00
  5. Glue for bellows repair
    By Chris_6172 in forum Gear
    Replies: 5
    Last Post: 23-Mar-2006, 09:21

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •