We are far from that issue
and we will need some idea of quantity
spare parts too
This could expand too much
I bet somebody, not me, comes up with a copycat Kickstarter
A lot of lurkers about, seeking ideas to use
We are far from that issue
and we will need some idea of quantity
spare parts too
This could expand too much
I bet somebody, not me, comes up with a copycat Kickstarter
A lot of lurkers about, seeking ideas to use
Tin Can
It will happen, because someone will want one, but not have the skill (or time, or patience, etc...) to make it themselves. Meanwhile, many skillful people are trying to find any way possible to scrape up extra cash in this wilderness of an economy we've been in for the past 20 years.
I have wondered what others would do if a rivet or rivets became too loose. Although I am not having any trouble with mine, I believe I would dril and tap then use appropriate round head bolts.
Thanks. Unfortunately it does leak when the holder is in place (up the edge of the gap in the 3rd picture) unless the fil holder is pushed against the left side of the back.
How far has this gone? I'd be interested, especially in a 5x7 model.
Not far
The project needs a current owner to spec it, document in all ways
If 5X7, then a scale down
I think most owners prefer the rarity, as some have sold for big $$$
I doubt it will happen on this forum
Tin Can
Most engineering today is happening in the 3D-printing area, where you can end up with 3 formats cameras for $500, 1/5 of that if you print them your self.
Sent fra min SM-G975F via Tapatalk
Bookmarks