Results 1 to 2 of 2

Thread: Artifact identification

  1. #1

    Join Date
    Sep 2019
    Location
    Columbus OH
    Posts
    34

    Artifact identification

    Just finished a very productive weekend of plates about 20 over two days. The last however is riddled with artifacts. I知 mainly concerned about the veil along the right and lower border. I think it may be due to the plate drying. Do you think it is from a plate that dried out? Could I have fixed it with a few drops of silver nitrate solution before development?
    I have begun to sun my bath and will double filter it and I値l restore the specific gravity. I need to add about about 50 ml as well.
    Thanks for the help. Click image for larger version. 

Name:	52863CC6-0B2A-4642-87C3-AC02C27E17AB.jpg 
Views:	28 
Size:	37.9 KB 
ID:	215484

  2. #2
    Mark Sawyer's Avatar
    Join Date
    Jul 2004
    Location
    Stuck inside of Tucson with the Neverland Blues again...
    Posts
    5,986

    Re: Artifact identification

    My guess is that your collodion was just a bit thin and your pour-and-drain too fast, and most of your collodion drained off from those two edges. Note that you drained to the opposite corner, as shown by the little blue uncleared bead that was the drain point. That's a danger as your technique improves and you can do a quick pour-and-drain. Let it set up a few seconds longer before draining.
    "I love my Verito lens, but I always have to sharpen everything in Photoshop..."

Similar Threads

  1. ARTIFACT on my negative - what kind of light leak is this?
    By earlnash in forum Darkroom: Film, Processing & Printing
    Replies: 7
    Last Post: 9-Jun-2020, 21:40
  2. Artifact (dark ray) on Negative
    By Tim Povlick in forum Cameras & Camera Accessories
    Replies: 25
    Last Post: 11-Oct-2011, 06:33
  3. Band artifact scanning bw as color
    By Pat Kearns in forum Digital Hardware
    Replies: 1
    Last Post: 23-Mar-2011, 08:34
  4. Is this a light leak or a scanner artifact?
    By jonathan_lipkin in forum Digital Hardware
    Replies: 7
    Last Post: 5-Jan-2011, 05:59

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •