Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Scanner Options & Comparisons. Which to choose?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Mar 2021
    Posts
    9

    Scanner Options & Comparisons. Which to choose?

    I'm sure similar questions have been asked numerous times before, but always worth rehashing an important problem. Typically I use a Flextight X1 in a co-op where I pay an hourly rate to scan, however because of the pandemic I cannot use it and have not been able to for sometime. I'm sitting on a larger library of negs now and I really like to be able to see and edit them at this point. So here come the options and alternative questions. Looking to scan 120 mm and 4x5 with the option of making very large prints if need be.

    Obviously, the X5 is a better scanner than any Epson flatbed. The X1 does not stand out quite as far above, but still offers many advantage, especially at the 120mm level. No option is as good as a high quality drum scan done well, but I DO NOT have the budget for that whatsoever, sadly. I did find a Tango on sale for $1000, but also have nowhere to keep the behemoth and it broke my heart to see it go. This leaves the question what can I use at home that is budget friendly and will give me satisfactory results. I'm looking to post content to my site, while retaining the ability to make medium-large prints from my files.

    I can purchase a refurb Epson V850 for $700 which sits comfortably in what I can afford. I've used these before and they're definitely not bad, but I have never made prints from their scans. Would it be worth my time looking at a Creo Eversmart, or Screen Cezanne at all? I don't know much about them or their respective price tags. They are older equipment and I therefore wonder about tech issues and compatibility with my Windows 10 comp.

    Finally of course, there's the option of digital camera scans. Normally, I wouldn't see the value of using something with less resolving power to capture a MF or LF neg, like my Sony A7RII, however with stitching techniques I figure its possible to achieve very high MP images using this process. One possibility I've been wondering about is suing the Pixelshift feature for the Fuji GFX 100/100s. Has anyone seen, or heard of this being used for negative scans? Theoretically, if done right, it could yield better results than any scanner (outside of drum perhaps) at 400 megapixel output. I've been considering waiting for a good use GFX 100s to come up. If I could use it both as a working camera and high quality scanning solution that would certainly justify the price.

    I'd love to hear your thoughts Thanks!
    Last edited by nebd; 19-Mar-2021 at 18:29.

  2. #2

    Join Date
    Jul 2006
    Location
    Collinsville, CT USA
    Posts
    2,330

    Re: Scanner Options & Comparisons. Which to choose?

    Would be helpful to know just how large you want to print your images. Lately I have been printing no larger than 9"x12", so single exposures with a Nikon D850 with either a 65mm Macro Nikkor f/4.5 or a 12cm Macro Nikkor f/6.3 (lenses from a Nikon Multiphot) work our fine for me.

  3. #3

    Join Date
    Mar 2021
    Posts
    9

    Re: Scanner Options & Comparisons. Which to choose?

    Definitely bigger than that. My last show was mainly 24x30 and I hope to make prints at least twice that size in the future.

  4. #4
    Unwitting Thread Killer Ari's Avatar
    Join Date
    Apr 2009
    Location
    Ottawa, Canada
    Posts
    6,286

    Re: Scanner Options & Comparisons. Which to choose?

    I'm a dedicated Creo Eversmart/IQ Smart user, they're just fantastic machines and I cannot recommend them enough. The quality of their scans is up there with drum scans.
    There is currently someone (Michael Streeter) who takes care of sales and service on all of these machines, and they're quite reliable. https://www.scansolutionsonline.com
    The downside is the cost. You're looking at $2500 for an Eversmart Pro, and more for more recent machines. EBay sometimes has a Creo for sale for less, but you don't know what you're getting. Spare parts can be more expensive than buying a complete, working machine.

    So if your question is "What can I use at home that is budget friendly and will give me satisfactory results?" I'd have to say an Epson V7xx or V8xx, or even a 4990.
    For the price, they're pretty good scanners.

  5. #5

    Join Date
    Mar 2021
    Posts
    9

    Re: Scanner Options & Comparisons. Which to choose?

    Thanks! Do Creos work with modern computers or to I have to find an old unit to be compatible as is sometimes the case for older printers/scanners? What size prints can you comfortably make from the scans? IS there a particular model you recommend?

  6. #6

    Join Date
    Mar 2012
    Location
    Vermont
    Posts
    410

    Re: Scanner Options & Comparisons. Which to choose?

    Ari,

    Can you run that scanner with a regular Mac or does it need to run on legacy software/hardware? (firewire?)

    Thanks,

    Serge

    Quote Originally Posted by Ari View Post
    I'm a dedicated Creo Eversmart/IQ Smart user, they're just fantastic machines and I cannot recommend them enough. The quality of their scans is up there with drum scans.
    There is currently someone (Michael Streeter) who takes care of sales and service on all of these machines, and they're quite reliable. https://www.scansolutionsonline.com
    The downside is the cost. You're looking at $2500 for an Eversmart Pro, and more for more recent machines. EBay sometimes has a Creo for sale for less, but you don't know what you're getting. Spare parts can be more expensive than buying a complete, working machine.

    So if your question is "What can I use at home that is budget friendly and will give me satisfactory results?" I'd have to say an Epson V7xx or V8xx, or even a 4990.
    For the price, they're pretty good scanners.

  7. #7

    Join Date
    Oct 2015
    Posts
    1,573

    Re: Scanner Options & Comparisons. Which to choose?

    As I'm sure you're aware, digitizing for online content does not demand high quality scans. Second, I'm thinking that the solutions you might consider will correlate directly to what you define as medium to large-scale prints. For me, I consider a 13x19" print to be "large scale" and the results from my Epson flatbed with LF film is acceptable to me. MF film is pushing it with the flatbed and forget 35mm. For 35mm, I use a Konica/Minolta Scan Elite 5400II dedicated film scanner.

    The issue with a Creo et al is that they're old equipment, as you already mentioned. If a unit requires repair, what are you options? Camera scanning is certainly a viable option, but IMO it requires higher end equipment to get really good results. Personally, I'd start with your Sony A7RII and evaluate the results. If not acceptable, move on to those higher megapixel options you mentioned.

    Good luck!

  8. #8

    Join Date
    Mar 2021
    Posts
    9

    Re: Scanner Options & Comparisons. Which to choose?

    Cheers! To me a large print is 24x30 and up. Right now the images will be mainly for online, but that is more a factor of the pandemic than anything and I would prefer not to have to scan again in order to get good print quality.

  9. #9

    Join Date
    Jan 2006
    Location
    Tucson AZ
    Posts
    1,822

    Re: Scanner Options & Comparisons. Which to choose?

    Another happy Creo user here - I have the IQsmart 2 and it's excellent. Upside - great results, built like a tank, perfectly capable of running 24/7. Downside - humongous., heavy, not so cheap, and SLOW. Did I mention that it's like watching grass grow? On the other hand I've started doing 3D printing lately and that makes the Creo look speedy. The way I usually work is to load it up during the day and let it run all night so I have scans in the AM. It's fine for 35mm and 120 (I get 2 1/2 rolls on the bed) - not super for Minox (which I do use.) If I were doing a lot of MInox I would have sprung for the IQsmart 3. But as it is I'm happy with it for almost everything I do. I have a friend who shoots 14 x 17 and he has to run it in two passes because the bed width is 12 x 18. The scanning bed is open on three sides so you could scan 20 x24 in multiple stitched passes if you were so inclined. I opted for the big flatbed over a drum scanner because I want to do larger film someday and the mounting process is more fiddly than I want to deal with.

    Software - no problem. The Intel Mac mini is perfect - I used an old MacBook for years until it gave up the ghost. Maybe the best thing is Michael Streeter. I give him an A+++++ for outstanding support. I've gotten hosed up a couple of times and he's been able to log in remotely and fix things for me.

    Price - I paid somewhere close to $5k for a fully refurbed unit including around $600 shipping. It came with all the software and the proper calibration target. And Michael was truly outstanding with support and helping me get going with it.

    Having said all that I've scanned a lot of stuff with the Epson 750 wet mounted and it's perfectly fine for making 16 x 20 prints from 4 x 5. I made a couple of 30 X 40 canvas wraps from 5 x 7 and 8 x 10 negs scanned on the Epson and they're more than quite acceptable - for the money the 850 would be hard to beat for LF. Not so impressed with MF, though - I used a Nikon 8000 for MF until it died but now that I have the Crea(Kodak) I'm getting quite good results from MF - and reasonably nice 4 x 6's to 5 x 7's from the Minox.

  10. #10

    Join Date
    Mar 2021
    Posts
    9

    Re: Scanner Options & Comparisons. Which to choose?

    Very interesting. My fear with the Creos is the tech issues. If anything happens I imagine it could be a nightmare to resolve.

Similar Threads

  1. DSLR Scanner: Scans and Comparisons
    By Peter De Smidt in forum LF DIY (Do It Yourself)
    Replies: 83
    Last Post: 13-Jun-2014, 06:30
  2. Replies: 2
    Last Post: 14-Jun-2013, 00:09
  3. Help Needed to Choose a Scanner
    By Raffay in forum Digital Hardware
    Replies: 11
    Last Post: 7-Jan-2013, 01:57
  4. Scanner DPI Options
    By Bart B in forum Digital Hardware
    Replies: 23
    Last Post: 22-Sep-2011, 19:29
  5. Best Film For Scanner Comparisons...
    By Scott Rosenberg in forum Darkroom: Film, Processing & Printing
    Replies: 13
    Last Post: 16-Mar-2007, 19:08

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •