If you get one with a large flange, you won't have to worry about it getting stuck in your tripod head.
https://www.bhphotovideo.com/c/produ...to_3_8_16.html
(I would remove any rubber pad) I tried a couple different brands and one of them had very few threads.
Probably getting one, with as many threads that will go into your tripod head as possible and still be flush, is as important as the material. Some of the adapters are short so that they are guaranteed to screw all the way in, but all the way in has very few threads. If you don't get one with a large flange, pay attention to the outside end which may have a small squared off or beveled flange. If you have to use one with a small beveled flange so that it will mount flush with your tripod head, removing it may take more than the appropriate size of screwdriver.
Bookmarks