Results 1 to 2 of 2

Thread: DIY slide process using Fujihunt 6 bath E6 chemicals

  1. #1

    Join Date
    Jul 2010
    Location
    Singapore
    Posts
    222

    DIY slide process using Fujihunt 6 bath E6 chemicals

    My local lab in Singapore uses Fujihunt 6 baths E6 chemicals for their processing. I approached them to see if I can get some to develop my 8x10 Ektachrome slides by myself.

    I bought the 8x10 Ektachrome from Daniel Stone a few years back. Although expired in 2008 the colors still look rich after processing.

    This kit is 25 litres targeted at the photolabs so I was lucky the lab allows me to tap off some from them but there is a 5 litres kit off Freestyle too if anyone is keen.

    So here is the video

  2. #2
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,504

    Re: DIY slide process using Fujihunt 6 bath E6 chemicals

    Wow!

    Thank you
    Tin Can

Similar Threads

  1. Alt Process Chemicals; How long can they last?
    By Wayne Crider in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 20-Jan-2021, 02:16
  2. Alt Process Questions : Mixing Chemicals from scratch
    By Cletus in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 11-Nov-2012, 14:19
  3. Where to buy a two bath developer in Europe? Or raw photo chemicals?
    By l2oBiN in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 1-Dec-2010, 16:09
  4. E-6 Process, Tetenal 3-Bath, Jobo Processor and fuji slide
    By Brzeku in forum Darkroom: Film, Processing & Printing
    Replies: 7
    Last Post: 5-Dec-2007, 02:38

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •