It seems that Industrial Non Destructive X-Ray Testing 'NDT'
Uses or used to use film that size
I got a couple that will need a mod
I am not selling mine
I will need a deeper tank
It seems that Industrial Non Destructive X-Ray Testing 'NDT'
Uses or used to use film that size
I got a couple that will need a mod
I am not selling mine
I will need a deeper tank
Tin Can
I wonder how difficult it would be to graft 2 8x10 hangers together ? guessing the stainless would be the problem.
notch codes ? I only use one film...
I could cut film to fit my new hangers to 3.5 X 17 for super pano
Tin Can
Many many years ago, over drinks at the bar down the block from the lab, I was telling Dan Oshima (RIP) from The New Lab in San Francisco, that I was experimenting with some 9.5" aerial E-6 rollfilm, and was considering making cut film holders for panoramic cuts from the stock. His response? "Cool, I'll have Stainless Steel hangers custom made for you if you want"
Dan O was one cool Dude.
This is what I have
I may cut out the middle, allowing 7X17" film to fit easily
Then make acrylic gas burst tanks
7X17! by TIN CAN COLLEGE, on Flickr
Tin Can
Today I found 2 up 7X17 hangers
2 x Channel Hanger 7" x 17" 2 in 1
The last ones were eBay. this if from a NDT vendor
https://www.ndtmart.com/index.php
https://www.ndtmart.com/film-hangers-c-1_153.html
sizes up to 14X17
I ordered the channel hangers, not the tension ones
Tin Can
Bookmarks