Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: sheet film processing in film holders

  1. #1

    sheet film processing in film holders

    Has anyone else heard of processing in the film holders?

    An acquaintance of mine was telling me how he has processed sheet film in the film holders.

    He has a rectangular light tight tank with a sealable top and has adapted dividers to hold the film holders vertical. In the dark he pulls the slides of 4 dual side holders, puts them in the tank and pours in the developer. Put on the top and the lights can go on. He follows the same process he used for roll film - tank inversion every 30 seconds - lights go off and pours out the developer and does the same for the stop bath and first fixer as he uses a two-step fixing procedure. He removes the film and used a tray process for the second fixer and then the wash.

    I was concerned about contamination and staining with chemicals trapped behind the film in the holder and maybe that is one reason he uses a second tray for fixing. He claims he hasnít had a problem, though he has only done B&W whereas I often do color and contamination could be a concern. He has always done it this way as he was shown by the person who sold him his setup years ago.

  2. #2
    Whatever David A. Goldfarb's Avatar
    Join Date
    Mar 2000
    Location
    Honolulu, Hawai'i
    Posts
    4,657

    sheet film processing in film holders

    Doesn't sound like a terribly good idea to me. What about the felt light trap in the holders? I can't imagine immersion would be too good for tape on the flap end either. Altogether it would be no go for wooden holders.

  3. #3
    Resident Heretic Bruce Watson's Avatar
    Join Date
    Sep 2003
    Location
    USA, North Carolina
    Posts
    3,274

    sheet film processing in film holders

    Insanity.

    Bruce Watson

  4. #4

    Join Date
    Sep 2003
    Location
    New Berlin, Wi
    Posts
    1,348

    sheet film processing in film holders

    Hangers are a lot cheaper..EC

  5. #5

    Join Date
    Oct 2003
    Location
    Middletown, NJ - Land of the Living Dead
    Posts
    190

    sheet film processing in film holders

    I think someone is yankin' yer chain...

  6. #6

    Join Date
    Apr 2004
    Location
    Southern California
    Posts
    100

    sheet film processing in film holders

    If the guy isn't kidding I'd sure be careful about buying used sheet film holders.

  7. #7
    Is that a Hassleblad? Brian Vuillemenot's Avatar
    Join Date
    Jan 2002
    Location
    Marin County, California
    Posts
    834

    sheet film processing in film holders

    I process my film in the film holders while they're still in the camera. I go through a lot of cameras that way, but it's worth it in the long run.
    Brian Vuillemenot

  8. #8

    Join Date
    Apr 2005
    Location
    New York City
    Posts
    412

    sheet film processing in film holders

    Why pull the dark slides at all? All you have to do is open them a little and then fill the holder with chemistry and then close the slide again and then each holder becomes it's own little daylight processing system. And while he's at it, he can just make an exposure and then fill the camera with the chemistry and process each sheet that way. That's where a good pan and tilt head comes in handy for proper agitation. The beauty thing is that by the time he gets home, all of his film is processed and ready for printing.

    And when he gets home he just has to pull into the garage and tape the printing paper to the wall and tape the neg to the headlight to make the exposure. If the negs are dense he can use the high beams and the fog lights make great safe lights. And he can do two at a time if both headlights are working but this guy sounds like maybe one of his headlights has been out for a while now.

    And so that light tight processing tank of his doesn't go to waste , he can put his digital camera in it to process his digital photos.

  9. #9

    Join Date
    Jan 2000
    Location
    New Jersey
    Posts
    86

    sheet film processing in film holders

    They might be talking about a Polaroid back.

    They almost look like holders and basically you process the film as your pulling it out of the holders.
    _______________________
    George Losse
    www.georgelosse.com

  10. #10

    Join Date
    Dec 1999
    Posts
    1,904

    sheet film processing in film holders

    You might mean film hangers which is one way to develop sheet film.

    I apologize for ther m,ockery that was made of your question. Too often that is how some of these forums operate.

    There are other forums you might try

    www.apug.org

    www.viewcamera.com

    steve simmons

Similar Threads

  1. Graflex 5x7 sheet film holders
    By Christopher Nisperos in forum Cameras & Camera Accessories
    Replies: 4
    Last Post: 4-Mar-2004, 17:24
  2. BEST sheet film holders ?
    By giancatarina in forum Cameras & Camera Accessories
    Replies: 13
    Last Post: 8-Dec-2001, 21:42
  3. Sheet film storage in film holders
    By Mark Windom in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 17-Nov-1999, 20:33
  4. roll film holders & sheet film in backpack
    By Raymond Bleesz in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 24-Sep-1999, 10:25
  5. Grafmatic sheet film holders
    By David Hedley in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 13-Jul-1999, 19:43

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •