Results 1 to 3 of 3

Thread: Dainippon Screen 1045 calibration error

  1. #1

    Join Date
    May 2015
    Posts
    2

    Dainippon Screen 1045 calibration error

    Hi everyone,
    suddenly the 1045 stopped calibrating and gives "Calibrate error01" on the display and "Scanner inside error Sense=4 Asc=94 Ascq=7" on the computer when a scan is launched.

    Running SH auto adjust says "status:111000000" where from the service manual i understand the first three 1s refer to an error about the c/v convertors mounted on photomultipliers. Apparently it doesn't convert for all three channels the photomultipliers current to right voltage, if i ve correctly understood. In the c/v the red is at 6316mV, green 6299mV and blue 6356mV. Strangely enough the service manual sets the right mV at 5000; lower than displayed, which is counter intuitive with decaying signals.

    Before plunging into dangerous manual adjustments and eeprom writing i wanted to know if anyone had experienced the same problem and maybe provide a shortcut. Probably my only possible luck here is a retired japanese technician from Screen who randomly reads drum scanning forums... not the most common.

    Thanks for any help ;)

    Best,
    Luca

  2. #2

    Join Date
    Feb 2007
    Posts
    45

    Re: Dainippon Screen 1045 calibration error

    Hi,
    you could also ask for help on the dts 1045 forum at groups.io

    Good luck!
    Pjotr

  3. #3

    Join Date
    May 2015
    Posts
    2

    Re: Dainippon Screen 1045 calibration error

    Quote Originally Posted by pjotr View Post
    Hi,
    you could also ask for help on the dts 1045 forum at groups.io

    Good luck!
    Pjotr
    Hi Pjotr, found it. I'll be posting there as well. Fingers crossed

Similar Threads

  1. Dainippon Screen DTS 1030
    By Gabriele Campagnano in forum Digital Hardware
    Replies: 0
    Last Post: 12-Nov-2014, 07:03
  2. Replies: 6
    Last Post: 9-Feb-2012, 10:01
  3. Screen 1030ai Error 1 ?
    By David Rowland in forum Digital Hardware
    Replies: 7
    Last Post: 20-Oct-2011, 19:50
  4. Screen 1045 AI or ScanMate 5000 ?
    By renes in forum Digital Hardware
    Replies: 7
    Last Post: 4-Oct-2011, 00:59
  5. Microtek ArtixScan 2500f vs. Dainippon screen 1030ai
    By Daniel Strasshofer in forum Digital Hardware
    Replies: 2
    Last Post: 24-Jul-2009, 13:26

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •