I have a couple of cameras I'm fixing up to use. The first is an Orionwerk Rio Tropen 9x12cm, c.1925. It needs a couple of brass strips made. One holds the plate holder on the back, the other is an internal angle brace. Am also looking for some metal plate holders for this camera. Camera also needs a set screw on the bottom of the front standard that a spring release attaches to. Second camera is a Contessa/ICA Sonnet 6x4.5cm. It's cute! It also is from the early 1920s. It needed a 7.5cm Tessar, a tiny one. The hole in the front standard for the lens was 23mm. I found a lens marked "Zeiss Ikon" and I think it was made for this camera. However, no retaining ring. where do I have one fabricated? Shutter also needs CLA. The bellows need replacing and UK Bellows can do it, but it will be fabric, not leather and won't have the decorative lines. Oh well. Once I get the shutter squared away and the new bellows attached I can shoot 6x4.5 dry plates in it.
Kent in SD
Bookmarks