Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: Any tips on how to repair lenses with Balsam Separation?

  1. #21
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    15,018

    Re: Any tips on how to repair lenses with Balsam Separation?

    don't forget the correct fire suppression device

    and children
    wear mask or NOT

    is ???

  2. #22
    Randy's Avatar
    Join Date
    Dec 2010
    Location
    Virginia, USA
    Posts
    1,321

    Re: Any tips on how to repair lenses with Balsam Separation?

    I soaked my cell in acetone - took about a week for it to dissolve and easily come apart. After cleaning the elements up, rather than balsam I used a drop of canola oil. I suspect that it is not as "permanent" as balsam, but after about a year, it had not discolored. I have since sold the lens fully disclosing my procedure to the buyer.
    https://dl.dropboxusercontent.com/u/52893762/bigger4b.jpg

  3. #23

    Join Date
    Jan 2019
    Posts
    196

    Re: Any tips on how to repair lenses with Balsam Separation?

    Quote Originally Posted by manfrominternet View Post
    Whoa! Thank you so much for this! You just saved an otherwise flawless Bronica lens from probable destruction, as I was planning on boiling the “balsam separated” lens element in my effort to fix it tonight. (In this case, would it still even be called “balsam separation”?)

    I did a cursory search on Google and couldn’t find methylene chloride easily available in my area (and I live in Los Angeles!). Apparently you can’t get this at Home Depot. Is there a pre-mixed compound of methylene chloride, methanol, and ammonia available for optical situations/problems like this?

    Regarding optical UV glue, I take it that any old optical UV glue from Amazon won’t work, will it? Also, would it be safe to assume that Norland 61 has some sort of special optical property that Canada balsam doesn’t have? (I just bought a little bottle of Canada balsam from Amazon before even starting this thread, unfortunately.)

    Anyway, many thanks again! I appreciate it.
    Methylene chloride is a very strong solvent that is a significant health hazard (as in, touching it momentarily won't poison you, but major inhalation or skin exposure can cause various kinds of damage). Some paint strippers used it, but paint strippers with methylene chloride have been banned. I used it once years ago to build a slot processor by gluing acrylic. Maybe plastics stores still have it. However, you must use it cautiously.

Similar Threads

  1. Fixing balsam separation
    By Scyg in forum Lenses & Lens Accessories
    Replies: 1
    Last Post: 5-May-2020, 01:42
  2. Fixing Balsam Separation
    By Two23 in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 21-Feb-2017, 09:37
  3. How problematic is Balsam separation in a lens
    By dimento in forum Cameras & Camera Accessories
    Replies: 4
    Last Post: 23-Oct-2015, 10:48
  4. Balsam Separation on Used Lens
    By alavergh in forum Lenses & Lens Accessories
    Replies: 6
    Last Post: 13-May-2014, 05:09
  5. Canada balsam separation repair??
    By John Cahill in forum Darkroom: Equipment
    Replies: 8
    Last Post: 20-Jun-2008, 15:05

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •