Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Ritter 11x14 Feedback

  1. #11

    Re: Ritter 11x14 Feedback

    Quote Originally Posted by Rhyno214 View Post
    Compared to the chamonix, how much less stable are we walking? I have the option to buy one of the two in the next few months and stability is one thing I really care about. Nothing worse than camera shake ruining your $10 negative after humping the equipment in and out. I love his design and the $1000 difference is really tempting, but if im already going to spend upwards for $4000, I want to make sure its the best I can get.
    Iím in the exact same camp... of course the 13 vs 20 lbs conversation about how more willing youíll be to drag the Ritter out because itís lighter... an interesting conversation.


    Sent from my iPhone using Tapatalk

  2. #12
    Moderator
    Join Date
    Jan 2001
    Posts
    7,605

    Re: Ritter 11x14 Feedback

    Quote Originally Posted by Rhyno214 View Post
    Compared to the chamonix, how much less stable are we walking? I have the option to buy one of the two in the next few months and stability is one thing I really care about....
    As you may know, Richard does all sorts of custom mods. You might ask him whether he can offer a wind-stabilizer gadget to brace the standards, to provide a bit more rigidity at the cost of a slight increase in setup time. Or check with Alan Brubaker to see whether he's still in business and can supply one of his.

  3. #13
    Michael Jones's Avatar
    Join Date
    Nov 1998
    Location
    Nashville, Tennessee
    Posts
    544

    Re: Ritter 11x14 Feedback

    Its been my experience stability is not totally dependent on the camera*. The format and tripod weigh in mightily. Consider what we are using is basically a “box” the size of our format. A 4x5 is a no-brainer to set up in the field. An 8x10 is a bit more complicated as the camera mass and profile are exposed to wind. It is exponentially more difficulty to use a 20x24 with 6’ of bellows in the field. Is a Ritter as stable as a Sinar on a camera stand? No. Neither is a Chaminox (or others). Is a Ritter as stable as a Chaminox or Phillips in the field? Yes; and I have the use of all to back that up. And like Francis F. I can vouch a 26 pound Ritter 20x24 is stable in the field. Did I use two tripods; sometimes. But mostly I set in up in calm conditions. Did I use it in strong winds; of course not. Why would I; my subject is likely moving as well.

    The mass (primarily weight) adds to the stability of the area setup. Hoisting a 26 pound V-11 onto a Reis A tripod gives you about 40 pound package. My current camera, an 8 pound Ritter 11x14 on a Reis J is about 15 pound package; similar to many 4x5s, but with a large “frontal area” exposed to wind. The size of the boxes is the same, 11” x14” x16”, but the Ritter weight is less than 1/3. However, the Ritter is stable and locks down; its mass and profile make how & when it’s set up critical. I hang my equipment bag from the tripod for good measure. I can pack the Ritter places I could not carry a V-11. Its quick to set up and locks down nicely.

    Much in photography is a trade off; how much do you want to carry and how far?

    Once you get past a Ritter looks different, it works just like other cameras; it just does not weigh as much, Chaminox Alpinist and Phillips Explorer aside. BTW; I lost my Explorer in Utah when after setting up I turned to get a film holder and an unexpected wind gust wind blew camera and tripod into a ravine. It had been stable; it just became more like a sail for a fraction of a second primarily because it was basically an 8” x10” x12” five pound box exposed to the wind.


    My thoughts (plus 69 cents gets you a cup of coffee).

    Mike

    *Having owed a number of 100 year old cameras, I can vouch they are rickety-restored or not- and seldom stable, but eminently usable when you consider their limitations.
    ďYou canít have everything. Where would you put it?Ē

  4. #14
    Vaughn's Avatar
    Join Date
    Jan 2007
    Location
    Humboldt County, CA
    Posts
    7,872

    Re: Ritter 11x14 Feedback

    Quote Originally Posted by Greg View Post
    ...Just once I have experienced "camera shake"... my fault at the time when I packed the wrong cable release and manually tripped the shutter with my finger. I have been 100% satisfied with the stability of my 11x14 Chamonix.
    I have the same set-up. My old Eastman 11x14 was great...just a lot of care needed. And camera shake happened rarely...and usually from me using the lenscap as a shutter for short exposures (<2 seconds).

    The 7x17 Ritter I used was very stable -- no complaints about set-up or use. My first 11x14 experience was with a friend's home-made 11x14 that puts the Ritter to shame, weight-wise. There was a little hassle to assemble it each time and the dedicated tripod it was designed to work with was a little funky, but I got some great images with it...this one was with a 355mm G-Claron:
    Attached Thumbnails Attached Thumbnails TwoReds11x14.jpg  
    "Landscapes exist in the material world yet soar in the realms of the spirit..." Tsung Ping, 5th Century China

Similar Threads

  1. Building 11x14 Film Holders - Feedback on an idea
    By MAubrey in forum LF DIY (Do It Yourself)
    Replies: 7
    Last Post: 5-Oct-2016, 12:47
  2. 11x14 Chamonix feedback?
    By Robert Fisher in forum Cameras & Camera Accessories
    Replies: 27
    Last Post: 15-Jan-2016, 01:24

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •