I dug out the old platemaking vacuum frame I had and finally built a work area in front of the darkroom I can use it in. I call it the dim room. It will share space with the mat cutter and drymount press. Tried it out today, its so much nicer than the little 10x12” contact frame I was using. Ran vacuum with an old Robinair unit. The uv leds are the ones I recently got, really easy to work with, 110v plugs so I just had to use a power strip and plug it into the timer and good to go. Exposure time for van dyke about 12-13 minutes.
Bookmarks