This is new for me. Just picked up an 18" Verito that is mounted to a board with 2 flanges. The inner one belongs to the Verito.
Is this common?
This is new for me. Just picked up an 18" Verito that is mounted to a board with 2 flanges. The inner one belongs to the Verito.
Is this common?
I guess if the larger one is for a lens in barrel that does not protrude past the flange.
Well there's an idea I would never have thought of!
Thanks, but I'd rather just watch:
Large format: http://flickr.com/michaeldarnton
Mostly 35mm: http://flickr.com/mdarnton
You want digital, color, etc?: http://www.flickr.com/photos/stradofear
I'm guessing that's a Depression-era money-saving idea.
Clever, too!
Lens boards don't grow on trees, ya know!
I'm with Dugan.
Is it wrong of me to consider mounting that flange to the back of a Chamonix board to do the exact same thing? I have an 18" Beseler opaque projector lens mounted to a Chamonix board that doesn't protrude past the flange. I imagine the only loss would be the reduction of light through the slightly smaller hole in the Verito flange when using the Beseler lens.
Posting Permissions
Reply With Quote
Bookmarks