Results 1 to 4 of 4

Thread: storing fresh 4x5 polaroid prints in the field

  1. #1

    storing fresh 4x5 polaroid prints in the field

    I've been having some issues storing fresh 4x5 polaroid prints in the field while shooting. Currently, I put them in a small 4x6 archival print storage box. There, they are protected from dirt and grit, but since they're fresh and a bit gooey they end up sticking to each other. Does anybody have any suggestions for storing fresh polaroid prints in the field in a way that will protect them from the elements *and* from each other?

  2. #2

    Join Date
    Aug 2005
    Posts
    152

    storing fresh 4x5 polaroid prints in the field

    Mr. Vanegas,
    How about cutting some sheets of wax paper to go inbetween each polaroid ? Cut then before you go, and just store them in the box.

  3. #3

    storing fresh 4x5 polaroid prints in the field

    It's a bit of trouble, but I adapted a box to store Pola prints while they're wet. I used foam core on two sides with slits in the surface so I can slide prints into the slit and keep them separated. In the box I used, I had to double up foam core on both sides to adjust the width to fit the prints. It's a bit of a pain as it another piece of gear to carry arround, but it works pretty well.

  4. #4

    storing fresh 4x5 polaroid prints in the field

    What film are you talking about here?

Similar Threads

  1. Enlarging 4x5 Polaroid prints. How big?
    By Bill_1856 in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 28-Jul-2006, 10:09
  2. Coating Polaroid Prints
    By brian steinberger in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 15-Apr-2006, 21:17
  3. Too much contrast in Polaroid 55 prints
    By Mark McCarvill in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 9-Feb-2005, 08:04
  4. polaroid prints and mounting tissue
    By bob moulton in forum Darkroom: Film, Processing & Printing
    Replies: 0
    Last Post: 7-Apr-2000, 17:57
  5. how to coat polaroid prints?
    By Josh Wand in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 1-Jan-2000, 13:10

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •