I sent you that Variac. Glad it found a loving home !
I sent you that Variac. Glad it found a loving home !
150mm G-Claron...I can print to 30x40 inches vertically with my Zone VI with this wonderful little lens. It is optimized at f/22...no problem for me with a Heiland head - but my guess is that your 500 watts should be fine, and f/16 is very close...performance wise.
I just made my first enlargement with the Elwood in its new home. This time I set it up with the original 500w bulb and oh boy is that to much light with modern paper! I was looking at less than 5 seconds at f45. I found a tip on another forum. Replace the bulb with an E40 type decorative bulb at 100w and use a socket extender to place the bulb in the proper position. Now F11 at 30 seconds. Much better and the first print looked evenly illuminated.
Sent from my iPad using Tapatalk
...Dilettante! Who you calling a Dilettante?
Well I got the enlarger set up but as of now no 5x7 negs to print I am waiting for an order of film to arrive and then one of the Steadman 8x10 processors ,can anyone suggest a source for developed in focus negs I would like to obtain one to fine tune the enlarger/lens.
Bookmarks