Darkroom setup for contact printing

[marcookie]

Hello,

I made a short "tutorial" on my setup for contact printing. It could be a useful starting point for someone who wants to start with this process.

[peter schrager]

Hello,

I made a short "tutorial" on my setup for contact printing. It could be a useful starting point for someone who wants to start with this process.

easier to hook light up to a pulley with the electrical line so you can raise and lower it....dodging tools should have a jagged edge so as not to leave a line on the paper...just a tip

[Duolab123]

Hello,

I made a short "tutorial" on my setup for contact printing. It could be a useful starting point for someone who wants to start with this process.

Nicely done! Everyone should be able to make contact prints for proofing and final prints. Proofing roll films (and sheet film ) teaches one how to better expose your film in the first place. If you use auto exposure in a 35mm camera, making a proof will demonstrate that white or black subject, every frame will come out neutral gray.