Results 1 to 8 of 8

Thread: Using a recessed lensboard backwards

  1. #1

    Join Date
    Nov 2019
    Location
    DC
    Posts
    35

    Lightbulb Using a recessed lensboard backwards

    Maybe this is stupid, but.....

    If my camera's maximum bellows doesn't allow for very close(portrait-distance) focusing with a 12-inch lens, could I use a recessed lensboard, but backwards, sticking out?
    It seems to me that this would work, giving me some 'free' bellows distance.

    Am I thinking straight?

  2. #2

    Join Date
    Dec 2006
    Location
    Hamilton, Canada
    Posts
    1,881

    Re: Using a recessed lensboard backwards

    Deardorff made a box exactly for this, so yes, although lips and insets would need to match.

  3. #3
    Big Negs Rock!
    Join Date
    Mar 2000
    Location
    Pasadena
    Posts
    1,188

    Re: Using a recessed lensboard backwards

    Also, you could use a diopter.
    Mark Woods

    Large Format B&W
    Cinematography Mentor at the American Film Institute
    Past President of the Pasadena Society of Artists
    Director of Photography
    Pasadena, CA
    www.markwoods.com

  4. #4

    Join Date
    May 2015
    Location
    Hernando, Mississippi, USA
    Posts
    34

    Re: Using a recessed lensboard backwards

    There are "Top Hat" lens boards made for just this purpose

  5. #5

    Join Date
    Feb 2001
    Location
    Nara, Japan
    Posts
    1,296

    Re: Using a recessed lensboard backwards

    Using a recessed board backwards isn't always possible. There are all kinds of grooves and recesses on the rear of lens boards that act as light traps.

    Kumar

  6. #6

    Join Date
    Jul 2006
    Location
    Collinsville, CT USA
    Posts
    2,330

    Re: Using a recessed lensboard backwards

    Quote Originally Posted by B.S.Kumar View Post
    Using a recessed board backwards isn't always possible. There are all kinds of grooves and recesses on the rear of lens boards that act as light traps.

    Kumar
    So true for Sinar boards, there is a recessed groove on the rear of the lens board preventing one from mounting the board backwards. Sometimes you get lucky and the recessed part is attached by 4 or more screws. Simply unscrew the screws and reattach the recessed part to the front of the board giving yourself a "top hat" lens board. On one recessed Sinar style lens board, the recessed part was friction fit (scary). In that board reversed mounted the recessed part and added a lot of epoxy to make sure the top hat would not fall out.

  7. #7

    Join Date
    Dec 2014
    Location
    Iowa City, Iowa
    Posts
    1,697

    Re: Using a recessed lensboard backwards

    I've used a Calumet CC-400 recessed board backwards worked fine. That's a pretty simple board, not sure how this would apply to other makes.

  8. #8

    Join Date
    Sep 1998
    Location
    Oregon now (formerly Austria)
    Posts
    3,397

    Re: Using a recessed lensboard backwards

    I use a homemade top-hat board to get my 300mm Nikkor M to focus on my Wista DXs. Works fine as long as you don't have to do a lot of swinging or tilting with the front standard.

    Reversing a recessed board will work if the board fits and doesn't leak light. Some of the more complicated board mounts had baffles, grooves, etc. that may not match up correctly with the board turned backwards. Top-hat boards are available for most cameras.

    Doremus

Similar Threads

  1. Recessed Lensboard?
    By 4x5fan in forum Lenses & Lens Accessories
    Replies: 6
    Last Post: 2-Sep-2014, 12:29
  2. 2x3 recessed lensboard?
    By jeff ross in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 3-Nov-2006, 13:29

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •