Toyo 5x7 deluxe monorail bellows and lens question

[Bauie]

Today I was fortunate enough to be given a TOYO V Deluxe monorail 5x7. I can't seem to find anything about this model on google. The owner said it had been sitting in his garage for at least 25 years. Is it a common model? What age would it be?
Anyhow, the bellows is 100% toast, where might I find a replacement, I looked on toyoview.com but that wasn't any help. If I can buy the bellows does it come with the flange on either end of the bellows or do I have to attach them myself?

The lens is a 180mm f4.5 K.Yamasaki Congo, there is a Wikipedia page about these lenses. Are they any good? I have other lenses I can use if I can find a lensboard for this camera.

thanks for any help.

[Tin Can]

Your closest bellows may be China, look on eBay

I have bought from Custom Bellows with really great results http://www.custombellows.co.uk/index.html

Some here are looking into https://dynatect.com/product/protect...ustom-bellows/

or DIY, bag bellows are relatively simple to make

[Bernice Loui]

Long as the bellows frames are good, the bellows can be replaced. This will likely be made to order or DIY. Check with one of the bellows manufactures about getting a bellows made to order, delivery and cost.

Lens, most any lens in shutter can be used on this camera. The 180mm f4.5 is likely a tessar formula and good long as the glass is in reasonable condition. Shutter will be more problematic as it is subject to a host of mechanical ills.. that can often be fixed-cured.

Picture of this camera?


Bernice

[Bauie]

Your closest bellows may be China, look on eBay

I have bought from Custom Bellows with really great results http://www.custombellows.co.uk/index.html

Some here are looking into https://dynatect.com/product/protect...ustom-bellows/

or DIY, bag bellows are relatively simple to make

Many thanks for those links.
I also found this company in England, any experience with them?
http://www.custombellows.co.uk/index.html?LMCL=duZDn5

[Bauie]

Long as the bellows frames are good, the bellows can be replaced. This will likely be made to order or DIY. Check with one of the bellows manufactures about getting a bellows made to order, delivery and cost.

Lens, most any lens in shutter can be used on this camera. The 180mm f4.5 is likely a tessar formula and good long as the glass is in reasonable condition. Shutter will be more problematic as it is subject to a host of mechanical ills.. that can often be fixed-cured.

Picture of this camera?


Bernice

The bellow frames are in perfect condition.
Here are two pics of it.

[Bob Salomon]

The bellow frames are in perfect condition.
Here are two pics of it.

Those are pictures of the camera’s front and rear standards that the bellows mounts to.
The bellows frames are on the bellows itself, you will see them once you detach the bellows from the standards.

[Bauie]

Those are pictures of the camera’s front and rear standards that the bellows mounts to.
The bellows frames are on the bellows itself, you will see them once you detach the bellows from the standards.

The pics were in response to Bernice who asked for pictures of the camera.
Here are pics of the bellows frames.

[Tin Can]

Yes many here use them, they make excellent bellows

They MAY even glue them to your frames, btw, those Toyo frames with the large flat surfaces make glueing easy if you use the right glue, which eludes me at this moment

Many thanks for those links.
I also found this company in England, any experience with them?
http://www.custombellows.co.uk/index.html?LMCL=duZDn5

[Tin Can]

The next question, which you should research everywhere, including eBay is how long do you WANT and NEED the bellows to be

[C. D. Keth]

I like to be able to focus a normal lens at 1:1. In reality the vast majority of what I do would be fine with maybe 160% of the bellows for a normal lens at infinity.


Sent from my iPhone using Tapatalk