I make boxes from very thin and lightweight hobby plywood with separators to hold the lensboards at distances appropriate for each lens. Each box hold from 3-6 lenses depending on the lenses involved.
I make boxes from very thin and lightweight hobby plywood with separators to hold the lensboards at distances appropriate for each lens. Each box hold from 3-6 lenses depending on the lenses involved.
Check fishing equipment suppliers for reel cases.
I have a couple that have grooves inside and several dividers so that they can be configured to suit different lenses.
https://www.gooutdoors.co.uk/1590592...d-bag-15905927
Mike
That's brilliant!
Here's a link for US folks
https://www.amazon.com/Fishing-Outdo...NsaWNrPXRydWU=
--
I should have added that the cases i linked to actually have the grooves at the right distance for Technika panels, so my setup has two lenses per case, held in place by the lens panel in the grooves and separated by a divider.
Two cases allows me to carry 4 lenses safely. Obviously, that approach will depend on the sizes of your lenses.
Mike
Bookmarks