Results 1 to 8 of 8

Thread: Contact print frame glass

  1. #1

    Join Date
    May 2006
    Location
    North Orange County, Southern California
    Posts
    127

    Contact print frame glass

    I accidentally (of course it was not on purpose) broke the glass in my 11x14 contact print frame.

    I cut a new sheet of glass but the edges are very sharp.

    Do you folks have any suggestions for smoothing the edges of the glass?

    Thanks

    Gary
    "People take different roads seeking fulfillment and happiness. Just because they're not on your road doesn't mean they've gotten lost." - H. Jackson Brown

  2. #2

    Join Date
    Dec 2006
    Location
    Hamilton, Canada
    Posts
    1,670

    Re: Contact print frame glass

    Sand paper or maybe more safely a sanding block. A belt sander works the trick.

  3. #3
    Barry Kirsten's Avatar
    Join Date
    Oct 2010
    Location
    Brookfield, Vic., Aust.
    Posts
    482

    Re: Contact print frame glass

    I use a sharpening stone that I use for honing chisel and plane blades. My stone has two surfaces, coarse and a fine, and I use the fine for glass.

  4. #4

    Join Date
    May 2015
    Location
    SooooCal/LA USA
    Posts
    1,900

    Re: Contact print frame glass

    Emery paper 220 grit on a sanding block will work...

    Be careful of the dust it creates as that can penetrate skin and you don't want it in your eyes... :-(

    Steve K

  5. #5
    Roger Thoms's Avatar
    Join Date
    Jun 2007
    Location
    San Francisco, CA, Flagstaff AZ
    Posts
    1,288

    Re: Contact print frame glass

    Wet - Dry sand paper and a sanding block. Been a while but I think I used 180 or 220 grit and wet sanded it.

    Roger

  6. #6

    Re: Contact print frame glass

    You will probably want to wear a mask as well.
    --- Steve from Missouri ---

  7. #7

    Re: Contact print frame glass

    I use a sharpening stone.

  8. #8
    Jim Jones's Avatar
    Join Date
    Aug 2006
    Location
    Chillicothe Missouri USA
    Posts
    2,767

    Re: Contact print frame glass

    I'm with Barry and Paul. Any old moderately coarse stone works fast and well. This use does gradually wear down the stone, so don't use a stone that you need for precision sharpening, like a plane blade. The first step in processing window glass for framing photos is to stone the edges to make cleaning and framing safer for me and subsequent photo owners. Yes, window glass is a poor substitute for any of the various glasses an elegant gallery would expect, but I ain't no elegant photographer.

Similar Threads

  1. Contact Print Frame
    By chris_4622 in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 7-Jun-2013, 18:16
  2. Contact Print Frame
    By Curt in forum Darkroom: Equipment
    Replies: 2
    Last Post: 3-Jun-2013, 12:46
  3. Contact Print Frame Glass?
    By HBDesert in forum Darkroom: Equipment
    Replies: 7
    Last Post: 17-Dec-2007, 09:08

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •