Results 1 to 7 of 7

Thread: Combining two Petzvals, would it make sense?

  1. #1

    Join Date
    Sep 2017
    Posts
    194

    Combining two Petzvals, would it make sense?

    I have been thinking about what would happen when one would combine rear and front elements from different Petzvals.

    Would this produce an usable image?

    What happens when different focal lengths are combined?

  2. #2
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,469

    Re: Combining two Petzvals, would it make sense?

    Who knows what you have?

    Front and rear of any lens may be different

    There are casket sets that mix and match a big variety

    Use all combinations and report back with images

    Usable images are another topic...
    Tin Can

  3. #3
    Nodda Duma's Avatar
    Join Date
    Nov 2014
    Location
    Batesville, Arkansas
    Posts
    1,116

    Re: Combining two Petzvals, would it make sense?

    The field lens group of a Petzval corrects coma and balances astigmatism of the objective group. So mismatching the the objective group and field group will result in degraded off-axis performance. You’ll likely lose the swirly bokeh effect and replace it with something less pleasing. Or you may get lucky and increase the effect. Of course, it depends on the specific cells you want to combine.
    Newly made large format dry plates available! Look:
    https://www.pictoriographica.com

  4. #4

    Join Date
    Jul 2001
    Location
    San Francisco, CA
    Posts
    715

    Re: Combining two Petzvals, would it make sense?

    I'm currently engaged in such nefarious activities... If the groups are of from lenses of similar focal lengths it can work out quite well. I have a 11.25" f3.6 Voigtlander with an awful front group. I replaced it with a nice front achromat from a no name 12" f4 petzval. The resulting lens seems very sharp, but I haven't shot with it yet, so the final verdict is still out.

  5. #5

    Join Date
    Jul 2016
    Posts
    4,566

    Re: Combining two Petzvals, would it make sense?

    Quote Originally Posted by Nodda Duma View Post
    You’ll likely lose the swirly bokeh effect and replace it with something less pleasing. Or you may get lucky and increase the effect. Of course, it depends on the specific cells you want to combine.
    Just a reasoning... not sure if it's right...

    IMHO it's easier that the swirl increases or stays the same, supose that we place a front group with an smaller entrance pupil, this may increase the swirl. Instead if we substitute the front group by one with a larger entrance pupil then probably we would get the same swirl, as anyway the rear group would be trimming the aperture disc in the OOF. Suposing that the Petzval has balanced entrance and exit pupils then swirl can only increase an smaller pupil in the front or in the back.

  6. #6
    Nodda Duma's Avatar
    Join Date
    Nov 2014
    Location
    Batesville, Arkansas
    Posts
    1,116

    Re: Combining two Petzvals, would it make sense?

    Changing pupil size has little to do with what I was talking about. Rather, I’m speaking to what the OP was asking.
    Newly made large format dry plates available! Look:
    https://www.pictoriographica.com

  7. #7

    Join Date
    Jul 2016
    Posts
    4,566

    Re: Combining two Petzvals, would it make sense?

    Quote Originally Posted by Nodda Duma View Post
    Changing pupil size has little to do with what I was talking about. Rather, I’m speaking to what the OP was asking.
    OP asks:

    Quote Originally Posted by erian View Post
    What happens when different focal lengths are combined?

    I'm speculating that the Franken_Petzval may easily produce a swirl even at larger apertures and more to the center when wide open. With also stronger fall-off. This would be beyond the off-center performance loss you mentioned, of course.


    You are the master optician, correct me if I'm wrong... I've only Franken-interchanged front cells of a convertible Symmar 150 and Symmar 210, both resulting Frankens (210-150 and 150-210) deliver a swirl in the OOF, which was not present with the right assemblies, and this should be because size-position of pupils.

Similar Threads

  1. Combining B&L Series VII with V
    By Maynaard in forum Lenses & Lens Accessories
    Replies: 7
    Last Post: 18-Mar-2014, 20:05
  2. Scanning Issue: does this make sense?
    By DrTang in forum Digital Processing
    Replies: 2
    Last Post: 23-Jul-2013, 17:32
  3. Replies: 14
    Last Post: 8-Apr-2010, 07:36
  4. Would this make sense ? (CREO EverSmart Pro)
    By Matus Kalisky in forum Digital Hardware
    Replies: 17
    Last Post: 7-Mar-2008, 19:05

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •