Quote Originally Posted by AndrewBurns View Post
http://midtonemachines.com/news/bits-and-pieces/

New blog post up, new heating tank that's working well, some ease-of-use firmware updates, getting some parts injection moulded etc. I've also added the ability to send the used chemical from any channel to any other channel, which allows for even easier replenishment without any external hardware.
Do you have provision for tempered water wash cycles? If you use Kodak Flexicolor process C-41RA like all C-41 processing Developer 3'15", Bleach (Process C-41 RA) is 1 minute, or longer if you prefer, followed by fixer, 2 minutes. Minilab machines run 3 consecutive stabilizer baths instead of a water wash. The method most folks at home use is several water wash cycles followed by Kodak Flexicolor Final rinse. The final rinse is a wetting agent with a biocide to preserve the gelatin of the finished negative. One single stabilizer bath without a wash step to get rid of the fixer is not adequate. Kodak specs the wash 2 min at 38°C , the non RA C-41 uses washing for 3 min 24-38°C