Page 1 of 5 123 ... LastLast
Results 1 to 10 of 45

Thread: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

  1. #1

    Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    5x7 Glass Omega E3 Carrier needs new glass by Nokton48, on Flickr

    This is an Automega E3 5x7 Glass Negative Carrier I just received. The top glass is missing, and the bottom has a crack in one corner. I'd like to replace them both.

    I've looked at old threads, and I'm still not sure where to go. Where are the best sources for these replacement pieces? Short of buying another carrier.
    Flikr Photos Here: https://www.flickr.com/photos/18134483@N04/

    “The secret of getting ahead is getting started.”
    ― Mark Twain

  2. #2
    Moderator
    Join Date
    Jan 2001
    Posts
    8,651

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    I've obtained anti-Newton glass from Focal Point:

    http://fpointinc.com/glass.htm

    EDIT: No longer in business, see post #9 below.
    Last edited by Oren Grad; 8-Jul-2019 at 11:33.

  3. #3
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,497

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    Dead link.

    But did find history of AN usage on their site.

    Fascinating http://fpointinc.com/history.htm

    Quote Originally Posted by Oren Grad View Post
    I've obtained anti-Newton glass from Focal Point:

    http://fpointinc.com/glass.htm
    Tin Can

  4. #4
    Moderator
    Join Date
    Jan 2001
    Posts
    8,651

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    Quote Originally Posted by Tin Can View Post
    Dead link.
    Works fine from here. I verified it before posting, just checked again.

  5. #5

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    If John is still selling ANR that is great news. I'll try contacting him
    Flikr Photos Here: https://www.flickr.com/photos/18134483@N04/

    “The secret of getting ahead is getting started.”
    ― Mark Twain

  6. #6
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,497

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    I don't see Focal Point on eBay either. There is a new company however offering custom cuts.

    Oren's link does open a 2012 FP page, but then the purchase link is dead.
    Tin Can

  7. #7
    Moderator
    Join Date
    Jan 2001
    Posts
    8,651

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    Quote Originally Posted by Tin Can View Post
    Oren's link does open a 2012 FP page, but then the purchase link is dead.
    You're right, my bad. Daniel, if you could post an update on whether you are able to get through, that would be great.

    EDIT: I also just sent an email to Mike to see what the situation is, will report back if I get a response.

    And another EDIT: Don't confuse this with John van Stelten's old lens repair business, which also operated under the name "Focal Point" but is now closed.

  8. #8

    Join Date
    Jul 2007
    Location
    near Seattle, WA
    Posts
    956

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    FWIW, my last email from him was on 2/12/18 to answer a question I had.
    Before that my contact from Mike was his email regarding how I should pay him for the AN & clear glass for my E6 enlarger. It was dated 7/29/17. Here's an excerpt of that email:

    My web site hasn’t been updated in quite some time.

    I don’t normally accept PO and Net 30 terms. It’s proven too time consuming.

    If you’d like to pay by credit card you can do through the order process and just not place an item in the cart. The order will be processed and I’ll know who it came from.

    You can also send funds through Paypal....Just use my email address to send funds.[see below].

    Or feel free to call me. I’m a one man operation and have no formal hours.
    386-473-4857
    Best Regards
    Mike Sparks

    email: mike@fpointinc.com
    Last edited by Jerry Bodine; 8-Jul-2019 at 12:29.

  9. #9
    Moderator
    Join Date
    Jan 2001
    Posts
    8,651

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    Just received this:

    Hi Oren
    Unfortunately the demand for our glass has lowered to the point that it's become unprofitable. It's been a good 30 years but all things must come to an end.
    Best Regards


    To be clear, Mike was the proprietor of the business which had its website at fpointinc.com.

    Apologies to anyone I've sent astray with that link.


  10. #10
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,497

    Re: Automega E3 Glass Negative Carrier Needs New Anti-Newton Glass

    Too bad demand is so low.

    I looked for how AN is made. Found this discussion. https://www.photo.net/discuss/thread...it-made.32592/

    There are many other sources easily found.

    I do know, AN glass as it easily scratched and thereafter needs to be cut down for smaller format usage.
    Tin Can

Similar Threads

  1. Replies: 2
    Last Post: 15-Oct-2022, 14:37
  2. Clean a 4x5 negative carrier with anti-Newton ring glass
    By Robert Ruderman in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 3-Nov-2003, 20:22

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •