Drew Bedo
www.quietlightphoto.com
http://www.artsyhome.com/author/drew-bedo
There are only three types of mounting flanges; too big, too small and wrong thread!
I like using CVS Lens Wipes. They are the individually wrapped microfiber wipes with isopropyl alcohol. I first started using them almost daily to clean my eyeglasses and after a year of continual use, my optometrist commented on how new my eyeglasses looked. So I began to use them on my camera lens and have been very pleased with the results. I had been using photographic microfiber cloths but kept getting getting cleaning wipe/scratches on my lens (yes I occasionally washed them). Since I went to these wipes I have not noticed any new wipe marks. I think they have just the right amount of alcohol on them and since you use a new one each time you are not worried about contamination. Sure they are individually wrapped. When in the field I just put the wrapper in my pocket or case until I get home or find a trash can. They are a little on the expensive side, but I feel worth it. This is my personal experience/opinion.
Maybe you should tell CVS, they don’t seem to recommend them for cameras!
“...This product is safe for coated lenses. There is no need to re-wipe your lenses with a dry cloth, making these wipes great for on the go. You can also use them on ski goggles, swim goggles, mobile phones, wrist watch glass, and TV or computer screens (except for liquid crystal screens). With so many uses, you'll want to keep several handy throughout your home.”
“...Warnings
For external use only.
Keep out of reach of children.
Do not use on eyes. Not for use with contact lenses or liquid crystal screens. Do not use on frames made of tortoise shell or gems. Do not use if rash or skin irritation is present. Do not use on lenses with scratched or damaged surfaces or with peeling or flaking coating. May cause deterioration of lenses. Flammable; keep away from open flame.”
“...Ingredients
Ingredients: Isopropyl Alcohol, Water, Fragrance.”
Wouldn’t think of using these on camera lenses, or my eye glasses!
I think that's CVS's lawyers talking.
They don't want somebody suing them because the customer found a "cleaning mark" on their $2000 lens. They're willing to risk that on a $200 pair of glasses.
Seldom clean them. I blow dust off with dry air.
Lens caps help.
I think the more we clean them the worse they get.
I never understood lens cleaning dry tissues like sold long ago, scratchers.
Any dust will scratch even when wet.
I only clean old lenses that are new to me and have heavy haze.
Read this and scroll down to see the images. Front Element Scratches
Tin Can
I have a different take on lens cleaning from that of most folk, I suspect. I save my Zeiss and Sensei lens cleaning papers and wipes for emergencies, which to me mean situations in which I have no access to a clean cotton ball or clean cotton swab. This goes back to my days of cleaning microscopes. I found microscopic damage to lens coatings when using lens papers, and the lens cleaning microfiber cloths are just too blasted difficult to keep clean...and once you use them, you'll have to rationalize that they are no longer clean! So, why is the cotton ball or swab superior, in my opinion? Dirt you are removing goes deeper into the fibers with the cotton ball or swab, and if you constantly present a fresh surface of the cotton fibers, will not scratch your lens. Can't say that about the lens papers, which I believe only survive on the market for their convenient packaging. Papers easily contaminated, too. After using the cotton fiber ball or swab, be it with or without lens cleaning fluid dampening, as required, I use the air puff device without the brush to blow away any loose fibers. I've been seen using it in the field with the brush in a dusty environment when I didn't want to open cotton ball pack. Believe me, I don't have any evidence of damage to coated surfaces with the swab or cotton ball cleaning method, as long as visible loose dust is puffed away before using the fiber device. This works also on optical flats, mirrors, etc., but I'd not try it on pellicles.
I used to work with specially coated optical flats, both glass and metal mirrors, and some other very fine surfaces. I saw many items damaged by scatches from KimWipes fresh from a box. I wasn't present when box was opened, so I cannot say the wipes had not been contaminated. However, a local optical shop advised me never to use those on my coated glassware. I also had some similar blue wipes that came in a 15 lbs box for 14" square wipes (believe size correct, could have been 12 X 12). I found that they were good for very fine metal shop use, but not good-enough for optically lapped metals, for it was evident that the wipes were reinforced with fine glass fibers!
When you use a microfiber cloth designed for lenses and dust or oils are trapped between the fibers and do not penetrate into the fibers. When cleaning the cloth you just wash them in a sink like other delicate fabrics, that will remove the trapped particles. Let the cloth air dry.
Always shake a microfiber cloth before use to dislodge any debris it may have captured.
You might also note that both Rodenstock and Schneider offer microfiber cleaning cloths.
Bookmarks