Hello,
I took a Caltar II-N 210 with Copal No.1 shutter from a Cambo board and trying to mount it to a 4x4 inch wooden board I made with a router. The Cambo board is only 1/10 inch in thickness. The problem is that the wooden board I made is much thicker so the threads on rear of the lens does not quite long enough to screw the retaining flange on rear of the lens.
I had to grind down a recess area around the hole to for the flange to sit into. While it works, there is little comfort knowing that the lens board is only about 1/8 inch thick around hole.
I thought about mounting the lens on a small metal lens board then mount the metal lens board on the wood lens board but that seems redundant and I don't have metal cutting tools.
Is there a better way to mount modern a lens with short threads on a wooden lens board?
https://drive.google.com/file/d/1gfx...ew?usp=sharing
Thanks
Bookmarks