Results 1 to 4 of 4

Thread: Bausch and Lomb Display Piece

  1. #1
    Enthusiast
    Join Date
    Jan 2019
    Location
    Wisconsin U.S.A.
    Posts
    4

    Cool Bausch and Lomb Display Piece

    Hi All. I scored this Bausch and Lomb lens and Unicum shutter of the bay for less than fifteen bucks. The shutter was pretty much grenade and the aperture blades were completely missing. I thought I would clean it up as a display piece. I love polished brass. So that's what I did. I cleaned the shutter mechanism but one of the blades is broke and it would jam so I removed the blades for now but hope to acquire so parts in the future. The missing timing cylinder I simulated with a piece of golf club shaft and a top I machined out of a chunk of aluminum. Lacking a screw the pin is a peened finishing nail. Also hoping for future parts.

    The glass is really clean and appears to have a focal length of about 11 1/4". I hope to get some shots at some point with a digital adaptor but really wish I had the aperture working. Once again maybe in the future. It seems pretty sharp. Not sure if some of you may have seen a similar lens in the past. The only markings on it are some scribed serial numbers on the inside of the front and rear lens pieces.

    Either way it looks great hanging off the front of my Newton New Vue.
    Click image for larger version. 

Name:	1.jpg 
Views:	51 
Size:	45.1 KB 
ID:	187897 Click image for larger version. 

Name:	2.jpg 
Views:	50 
Size:	38.6 KB 
ID:	187898 Click image for larger version. 

Name:	4.jpg 
Views:	46 
Size:	41.3 KB 
ID:	187899
    Attached Thumbnails Attached Thumbnails 5.jpg  

  2. #2

    Re: Bausch and Lomb Display Piece

    It looks nice. Any idea what it is? BTW, many of us shoot old lenses with just lens cap exposures, and often wide open, so it is not impossible to use it. For instance shooting paper negatives where you need a lot of light.

    Good luck with your projects.

  3. #3

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,101

    Re: Bausch and Lomb Display Piece

    Probably an F.8 RR. In an unusual mount for a Unicum.
    Unicums do have the problem of non-metallic blades - basically scrap when the iris needs work.

    The next generation of shutters were much better. I don't know if shutters like the Betax etc. have the same range of sizes, threads and distances?

    I have a wonderful Busch RR/Aplanat Unicum casket set which is idle because of a scrap Unicum - and a number of reserve Unicum shutters with exactly the same problems!

  4. #4

    Join Date
    Aug 2000
    Location
    California
    Posts
    3,668

    Re: Bausch and Lomb Display Piece

    I certainly would use it, probably wide open with lith film.

Similar Threads

  1. Who can tell me about this bausch & lomb
    By David Michael Bigeleisen in forum Lenses & Lens Accessories
    Replies: 7
    Last Post: 18-Jul-2010, 13:41
  2. Bausch & Lomb 5x7 Tessar
    By Athiril in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 22-Jun-2009, 08:57
  3. the Bausch and lomb plastigmat
    By snuck in forum Lenses & Lens Accessories
    Replies: 1
    Last Post: 5-Aug-2006, 09:58

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •