Page 22 of 22 FirstFirst ... 12202122
Results 211 to 216 of 216

Thread: Darkroom Renovation Phase 1

  1. #211
    Exploring Large Format Exploring Large Format's Avatar
    Join Date
    Sep 2019
    Location
    Seattle, WA
    Posts
    140

    Re: Darkroom Renovation Phase 1

    Quote Originally Posted by Daniel Unkefer View Post
    Nearly Restored 5x7 Sinar Norma by Nokton48, on Flickr

    Since we are all locked down I have been working on restoring my old Normas, as they are more than sixty years old, they need some attention. This is my 5x7, I have put in some new light sealing foam in the front and rear standards, and also new foam in this new to me Sinar Norma Shutter. I sent the shutter out for cleaning (it was sticky inside) and replaced the sync cord, although for whatever reason, it is still not firing with strobes. I will get it sorted eventually, for now I will use my other Norma Shutter with my strobes in the studio, it fires 100%. The lens is a Sinar Norma 121mm F8 Super Angulon, forward mounted with copal shutter built-in, and full Norma Auto Aperture automation. This is the most deluxe way you could get this lens from Sinar at the time. Looking forward to shooting more HR-U XRay film with this new to me camera. Should make fantastic split-grade VC RC prints.

    Also new in the studio are these background clamp weights from Savage, which keeps my seamless paper from rolling up by itself, and keeps the background tight and smooth looking. I can roll up or down in ten seconds any of my three colors of background paper, I have blue, black, and white. All three shown staggered against my studio back wall.
    Daniel, very impressive! What's your trick on the filter holder ring fitting with the Norma? Filing the hexagonal rod? Thanks in advance!

    Sent from my SM-G955U using Tapatalk

  2. #212

    Re: Darkroom Renovation Phase 1

    Quote Originally Posted by Exploring Large Format View Post
    Daniel, very impressive! What's your trick on the filter holder ring fitting with the Norma? Filing the hexagonal rod? Thanks in advance!

    Sent from my SM-G955U using Tapatalk
    No tricks required, you simply have to get the original Norma filter holder, the more modern version is different. The Norma FH has a red dot on it, and the original Norma hex rods had a red dot also. When properly put together you get the 45 degree swing with the Norma camera which works beautifully. When they came out with the newer F/P/C cameras things changed, since the rod is in a different place and they are really not interchangeable. Well, the hex rods are, of course, but not the holder.
    “The secret of getting ahead is getting started.”
    ― Mark Twain

  3. #213
    Exploring Large Format Exploring Large Format's Avatar
    Join Date
    Sep 2019
    Location
    Seattle, WA
    Posts
    140

    Re: Darkroom Renovation Phase 1

    Quote Originally Posted by Daniel Unkefer View Post
    No tricks required, you simply have to get the original Norma filter holder, the more more modern version is different. The Norma FH has a red dot on it, and the original Norma hex rods had a red dot also. When properly put together you get the 45 degree swing with the Norma camera which works beautifully. When they came out with the newer F/P/C cameras things changed, since the rod is in a different place and they are really not interchangeable. Well, the hex rods are, of course, but not the holder.
    Got it. Thanks much!

    Sent from my SM-G955U using Tapatalk

  4. #214

    Re: Darkroom Renovation Phase 1

    500CM 30 DIST Fuji Neopan 400 ADOX BORAX MQ by Nokton48, on Flickr

    25th Anniversary Hasselblad 500C/M with 30mm F3.5 T* Fisheye Distagon Fuji Neopan 400 in A12 back ADOX BORAX MQ Arista #2 8x10 RC Multigrade developer Omega DII with Omegalite diffusion head.
    “The secret of getting ahead is getting started.”
    ― Mark Twain

  5. #215
    Drew Wiley
    Join Date
    Sep 2008
    Location
    SF Bay area, CA
    Posts
    15,397

    Re: Darkroom Renovation Phase 1

    I simply ground some extra flats on one of my hex rods (now an "oct" rod), allowing me to use it on either an F camera or in either regular mode or diagonal position on the Norma. I don't have one of those flip-away filter holders, but might hypothetically be able to adapt a spare darkroom one. Wouldn't want to, however, because I use the rod for sake of a compendium shade made from a short section of F/P series box bellows. Gosh, they made all sorts of accessories.

  6. #216

    Re: Darkroom Renovation Phase 1

    Darkroom Renovation Phase II 1 by Nokton48, on Flickr

    Darkroom Renovation Phase II 2 by Nokton48, on Flickr

    Darkroom Renovation Phase II 3 by Nokton48, on Flickr

    Setting up the 8x10 Kodak Rubber 3 1/2 gallon Deep Tanks. Will start with DK-50 and DK-50 Replenisher, which I bought from a local camera store closing up.
    “The secret of getting ahead is getting started.”
    ― Mark Twain

Similar Threads

  1. Bellows renovation to do or not? (NOT LEATHER)
    By wood & Brass in forum LF DIY (Do It Yourself)
    Replies: 16
    Last Post: 17-Jul-2017, 08:37
  2. Phase One P45
    By sherry in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 24-May-2008, 15:11

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •