Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Jobo CPP2 motor is not turning on. How to repair?

  1. #1

    Jobo CPP2 motor is not turning on. How to repair?

    I have a Jobo CPP2 that has a motor that does not turn on.
    It heats, the pump works, but struggles. I think I needs to be cleaned. But the motor does not do anything.

    How should I go about troubleshooting the issue?
    Is there a place to find parts if necessary?
    Is there a repair manual available for this model?

  2. #2

    Join Date
    Jun 2014
    Posts
    1,638

    Re: Jobo CPP2 motor is not turning on. How to repair?

    I'd start with measuring here and there with a multimeter and also hook up the motor to an external power source to see if it runs. Then take it from there.

  3. #3

    Join Date
    Jan 2006
    Location
    Tucson AZ
    Posts
    1,503

    Re: Jobo CPP2 motor is not turning on. How to repair?

    Not sure if it's related but I had a similar problem a couple of years back - there's a very small button that resets the internal breaker. Omar at Catlabs of JP might have an idea.

  4. #4

    Join Date
    May 2006
    Location
    grand rapids
    Posts
    3,844

    Re: Jobo CPP2 motor is not turning on. How to repair?

    GOOD LUCK.
    I'm having issues with on of mine as well.

  5. #5

    Join Date
    May 2015
    Posts
    100

    Re: Jobo CPP2 motor is not turning on. How to repair?

    Omer Hecht at CatLabs is the most knowledgeable guy I know. He just walked me through some serious problems with my ATL-3. Were it not for him, it would now be in the dumpster. He is worth his weight in gold.

    http://www.catlabs.info/

  6. #6

    Join Date
    Dec 2014
    Location
    Iowa City, Iowa
    Posts
    936

    Re: Jobo CPP2 motor is not turning on. How to repair?

    Quote Originally Posted by docw View Post
    Omer Hecht at CatLabs is the most knowledgeable guy I know. He just walked me through some serious problems with my ATL-3. Were it not for him, it would now be in the dumpster. He is worth his weight in gold.

    http://www.catlabs.info/
    Omer helped me as well, he's Jobo USA authorized repair. Very willing to help.

  7. #7

    Re: Jobo CPP2 motor is not turning on. How to repair?

    Dave Smith of Electromechanical Services in LA, CA. Dave is a wonderful Jobo trained repairman.

  8. #8
    Jim Korpi
    Join Date
    Jan 2016
    Location
    Athens, Ohio
    Posts
    15

    Re: Jobo CPP2 motor is not turning on. How to repair?

    I am curious if you found a solution to your motor problem. I am having the same issue with my Jobo CPP2. Everything works but the motor.
    Curiously,
    Jim

  9. #9

    Join Date
    Nov 2014
    Posts
    14

    Re: Jobo CPP2 motor is not turning on. How to repair?

    Jim, if you are having the same problem that I have on one of my cpp2.
    In my case, the switch under my motor speed knob had broke. When I purchased it, the motor worked great at all speeds, but would not shut off. Your motor switch might just be broken in the off position. Listen carefully for that click when you turn it on. Iíve since removed the broken switch and am sourcing a relplacement.
    Hope this helps
    Mikey

  10. #10

    Re: Jobo CPP2 motor is not turning on. How to repair?

    Quote Originally Posted by mikey1two View Post
    Jim, if you are having the same problem that I have on one of my cpp2.
    In my case, the switch under my motor speed knob had broke. When I purchased it, the motor worked great at all speeds, but would not shut off. Your motor switch might just be broken in the off position. Listen carefully for that click when you turn it on. Iíve since removed the broken switch and am sourcing a relplacement.
    Hope this helps
    Mikey
    Did you find the correct part I have on that is in need of this part.


    jay

Similar Threads

  1. LOOKING FOR MANUAL FOR JOBO CPP2 PROCESSOR - HAVE CPP2 Service Manual in PDF
    By Dan Boardman in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 29-Apr-2012, 18:12
  2. What happens to JOBO CPP2 processor with only 1st upgrade motor?
    By Lloyd Shield in forum Darkroom: Equipment
    Replies: 56
    Last Post: 30-Jan-2010, 09:03

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •