I'm designing a lens wrench that I intend to share in the DIY section. I need your help though to get the right dimensions for the different Compur shutter flanges (No.0, No.1, etc...)
I tried to find online a table with these dimensions, but I didn't see any. Any help is greatly appreciated.
Parallel parking extraordinaire
Hi!
Please find attached a table with some dimensions for retaining rings for various shutter sizes: 00, 0, 1, 2, 3s, 3.
To expand on Dr. Bigler's info...
My Linos/Rodenstock lens wrench measures 1.0mm thick hardened steel.
It supposedly works for various sizes of Copal, Compur, and Prontor shutters.
- Leigh
Edit: Correction courtesy of Bob Salomon.
Last edited by Leigh; 7-Jan-2019 at 17:58.
If you believe you can, or you believe you can't... you're right.
No, Rodenstock makes the eShutter, which was made many years after the wrench was released, and is a 0 size.Originally Posted by Leigh
The wrench fits COPAL, Compur and Prontor 0, 1 and 3 size shutters.
I mis-spoke. I meant Copal rather than Rodenstock. Brain fade. I edited the previous post.
Thanks, Bob.
- Leigh
If you believe you can, or you believe you can't... you're right.
get an adjustable spanner wrench. they are fairly cheap. it will fit anything you have.
one source is MicroTools... google them
A good idea. That’s the style of lens wrench I’m using for my lens repair jobs. Great in a seasoned hand, disaster waiting to happen otherwise.
But I have a small CNC router gathering dust so I figured to do something about that.
Parallel parking extraordinaire
Why not just pick up a Linos/Rodenstock wrench? They work well and don’t wear out!
Agree. Why waste time making something you can buy inexpensively.
Keith Pitman
Thank you! This works. It’s not mentioning specifically the retainer key pitch but since I have the thread dimensions now, I can work it out from ASME or ISO standards.
Sent from my iPhone using Tapatalk
Parallel parking extraordinaire
Posting Permissions
Reply With Quote
Bookmarks