The problem with the Q 300 is that it's likely to be in an older no.3S Copal - a fine shutter, but darn bulkier and heavier than the late no.1 shutter the 300M is in. So yeah, double check the shutter specifics first.
The problem with the Q 300 is that it's likely to be in an older no.3S Copal - a fine shutter, but darn bulkier and heavier than the late no.1 shutter the 300M is in. So yeah, double check the shutter specifics first.
In contento ed allegria
Notte e di vogliam passar!
OK. Thanks everyone, that's plenty of food for thought for sure. Will keep my eyes open for a Nikkor.
Not sure how uncommon they are, but I have Nikkor Q 300 in Copal 1. It's a fine lens and I actually like the single coating.
Ethan
If by any chance you haven't read it, on the LF Home Page, down under "Lenses," take a look at the article on "Modern Lenses for 4x5 Field Work." Since no one makes LF lenses any more, you will be buying on the used market, and while the article is old, the choices from Mssrs. Sparks and Thalman are still relevant.
The difference between a single coated Q and multicoated M is probably negligible for most purposes. But I happen to keep both a 250/9 G-Claron (a single-coated lens series) as well as a very similar design, except multicoated, Fuji 240A. For black and white work the difference is almost imperceptible. But when it comes to color negs which sometimes have too little contrast, and color chromes, which sometimes have too much, the slight contrast bias between these two respective lenses is a valuable option.
I have two Nikkor Q 300 lenses. One in a Copal #1 and one in a Copal #3. I also like the single coat versions. The smaller shutter version is much lighter though.
Bookmarks