Results 1 to 9 of 9

Thread: Film developer for 8x10 and 35mm

  1. #1
    Steve Williams_812's Avatar
    Join Date
    Sep 1999
    Location
    Central Pennsylvania
    Posts
    111

    Film developer for 8x10 and 35mm

    I have been using HC110 Dilution B and D76 1:1 for 8x10 and 35mm respectively for many years.

    I want to use one developer for both. I've considered HC110 but the processing times have gotten too short for the JOBO.

    Anyone have any suggestions for a starting point? I shoot Tri-X exclusively in both formats.

    Thanks,

    Steve
    Steve Williams
    Scooter in the Sticks

  2. #2

    Join Date
    Dec 2001
    Location
    San Joaquin Valley, California
    Posts
    9,081

    Film developer for 8x10 and 35mm

    Nothin' wrong with D-76!
    I steal time at 1/125th of a second, so I don't consider my photography to be Fine Art as much as it is petty larceny.
    I'm not OCD. I'm CDO which is alphabetically correct.

  3. #3

    Join Date
    Dec 2001
    Location
    San Joaquin Valley, California
    Posts
    9,081

    Film developer for 8x10 and 35mm

    If you prefer diluting liquid chemicals instead of mixing powder, Nacco 76 will spoil you
    I steal time at 1/125th of a second, so I don't consider my photography to be Fine Art as much as it is petty larceny.
    I'm not OCD. I'm CDO which is alphabetically correct.

  4. #4

    Join Date
    Sep 2004
    Location
    Vittorio Veneto; Italy
    Posts
    87

    Film developer for 8x10 and 35mm

    Rodinal 1 + 50 for both if you do not mind having grainy 35 mm films. The results in 35 mm with Tri-x are similar of those obtainable with D 76 1+1.

  5. #5

    Film developer for 8x10 and 35mm

    Try HC110 at other dilutions: 1:15, 1:31 or 1:62. I only use 1:7 for N+

  6. #6
    grumpy & miserable Joseph O'Neil's Avatar
    Join Date
    Feb 2004
    Location
    London, Ontario
    Posts
    822

    Film developer for 8x10 and 35mm

    Ditto on watering down HC-110 and extending times. I use half strength Dilution B, and double the time in my Jobo, for Tri-x in 4x5. Your times and milage will vary, but you can mix HC-100 to just about any dilution you want to.

    joe
    eta gosha maaba, aaniish gaa zhiwebiziyin ?

  7. #7

    Film developer for 8x10 and 35mm

    Dilute HC110 to extend the times. I made up 1:45 from stock. I use it for 35mm at EI 200, 4.5 min at 68. Use about 6 for EI400. I`m down to my last 100 ft roll of tri x.

    I am getting away from Kodak anything as they will soon be exiting the film market. That means I have been home mixing D76 for about $3 a gallon. I like it better than HC110 and see no difference in my home brew and the package stuff.

    The development times are longer than HC110. If you want, you may dilute 1:1 or 1: .5 to extend. The last is 1 part stock to 1/2 part water, not a full 1:1 dilution.

    Do a water presoak with the Jobo to get longer times.

    Sorry I can`t help with Jobo times, as I have gone back to a 4x5 Nikor tank or stainless tanks and hangars for 4x5, and my 45 year old Nikor tanks for 35mm. I find the set up easier and faster and there are no quality differences I can see. Arkay just made one new tank and a hanger rack for me. The rack holds 8 hangars and there is no possibility of scratching as they fit tight as a unit. The three tanks sit in a stainless water jacket. I would not recommend buying new as the one tank and hangar rack cost $200. The rest came free from a neighbor along with a similar set up with 5x7 tanks and a hangar rack for 20 4x5 hangars.

    The Jobo is semi retired and only used for C41 4x5 now with the expert drum and very ocassionally 35mm C41.

  8. #8
    Abuser of God's Sunlight
    Join Date
    Aug 2004
    Location
    brooklyn, nyc
    Posts
    5,775

    Film developer for 8x10 and 35mm

    Are you doing the 35mm with inversion tanks?

    if so, i'm betting that using a weaker dilution for the 8x10 in the jobo for the 8x10 will actually give you results that are more consistent with your 35 negs.

    with iversion tanks, the intermittent development gives you a bit of a compensating scale, even with a strong dilution. in the jobo, you have continuous development, which is why your times are shorter, and which will also tend to give you a straighter scale. a weaker dilution will lengthen the time and also soften the scale a bit, to more closely match what you see in the 35mm.

  9. #9

    Film developer for 8x10 and 35mm

    There are many other developers which will give you excellent results. I prefer pyro for most of my work but hc110 at different dilutions works too. I'm not a fan of Rodinal but that's just my opinion. Naaco, ect are good too. The different pyro's have been around a long long time and give excellent results. You may want to give them a try. More effort you say? What are your images worth?

Similar Threads

  1. 35mm film disappearing?
    By kreig in forum Darkroom: Film, Processing & Printing
    Replies: 23
    Last Post: 8-Aug-2005, 08:05
  2. Film/developer/paper/developer combination
    By Sal Santamaura in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 31-May-2004, 21:53
  3. Which developer works best with Tri-X 8x10 sheet film???
    By ric YAMA in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 26-Nov-2001, 21:39
  4. widelux quality for 35mm film model?
    By Jon Paul in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 10-Apr-2001, 18:58
  5. UNDEVELOPED 35mm B&W FILM 30 YRS. OLD, STUCK TOGETHER. HOW TO PROCESS
    By HOLLY MAXSON in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 13-Feb-2001, 12:25

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •