Results 1 to 8 of 8

Thread: Bought a no-name tailboard by accident..

  1. #1

    Join Date
    Oct 2017
    Posts
    8

    Bought a no-name tailboard by accident..

    ...and may have a few questions.

    Saw an ad in the newspaper that someone is selling camera gear. Promptly stumbled upon this (at a price no one could say no).
    I haven't even half finished building my 4x5 and have the next project here already.





    Bellows seem fine, focusing gear is good and the ground glass is in order too.
    Just the plate holders are warped (those not belonging to the the camera are all fine.. and I'm not quite sure about the format? Is ~7x9 a thing?
    Wondering if the holders could be made humid and stuck in a press to dry?

    Just missing an affordable lens now. And a job to pay the film!

  2. #2

    Join Date
    Feb 2016
    Location
    So Cal
    Posts
    37

    Re: Bougth a no-name tailboard by accident..

    Re: " I'm not quite sure about the format? Is ~7x9 a thing?" If memory serves, 18 x 24 cm (the metric equivalent) is an older European analog to 8x10. Foma still makes film available in that size.

    https://www.fotoimpex.com/films/foma...50-sheets.html

  3. #3
    loujon
    Join Date
    Feb 2007
    Location
    Western, PA.
    Posts
    1,264

    Re: Bought a no-name tailboard by accident..

    Could it be whole plate 6 1/2 x8 1/2 ?

    That looks like a well made tail board camera and a very positive thing it came with a full lot of matching holders. The holders look like they may pass the light tight test as well. Add lens get some RC paper & load up the holders and go have fun.
    Last edited by Louis Pacilla; 1-Dec-2018 at 11:30. Reason: add

  4. #4

    Join Date
    Oct 2017
    Posts
    8

    Re: Bougth a no-name tailboard by accident..

    Quote Originally Posted by EarlJam View Post
    Re: " I'm not quite sure about the format? Is ~7x9 a thing?" If memory serves, 18 x 24 cm (the metric equivalent) is an older European analog to 8x10. Foma still makes film available in that size.

    https://www.fotoimpex.com/films/foma...50-sheets.html
    Measured it exactly and it's 23.9cm x 18, so quite surely the metric equivalent. I live in Switzerland so it'd be logic that it'd be metric really, but I forgot that existed!


    Quote Originally Posted by Louis Pacilla View Post
    Could it be whole plate 6 1/2 x8 1/2 ?

    That looks like a well made tail board camera and a very positive thing it came with a full lot of matching holders. The holders look like they may pass the light tight test as well. Add lens get some RC paper & load up the holders and go have fun.
    Indeed, but they're nearly too warped to get into the camera, hence me wondering if they could be straightened in a press after bathing in some steam?

    I'll adapt a 4x5 lens that has an image circle of 17cm to try it out on some of the paper I have knocking about. I've got a week of me needing some distraction before me, until my exam results come back!


    Edit: Did some googling. Could it be a Herbst & Firl Globus M? Not much info or image around to compare to!
    Last edited by Topsy; 1-Dec-2018 at 16:40.

  5. #5

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,634

    Re: Bought a no-name tailboard by accident..

    Sorry, only just discovered this thread.

    Yes 18x24cm. The maker was almost certainly German - it is certainly German style. France had the same sizes (1885 - 1925) but are different in appearance. Could be either Mahogany or Walnut. Only about 1/4 of these Reisekameras have maker's name or trademarks on them - but the quality of most of them are good.

    Plate holders always need work, but these "book" holders are easy to work on.

  6. #6

    Join Date
    Oct 2017
    Posts
    8

    Re: Bought a no-name tailboard by accident..

    Thanks Steven,

    I'm Almost certain it's a Herbst & Firl / Ernemann camera right now, but waiting on confirmation.

    Quote Originally Posted by Steven Tribe View Post
    Plate holders always need work, but these "book" holders are easy to work on.
    I did a small experiment in the kitchen with our steamer (to the annoyance of my mother ). Put the holder in, steamed it for a bit and immediately placed it in a bookbinders press applying a slight negative bend. Came out good enough to be usable I think.
    Tried the second holder without the steamer but kept it in the press for two days and that also seems to be straightening out fine.

  7. #7

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,634

    Re: Bought a no-name tailboard by accident..

    All my best repairs have been done in the kitchen!

    I did write about steam and using weights to reduce twisting, but there was a loss of internet and the automatic save function was asleep. Small twists - say 5mm on an 18x24 holder - will be OK when mountedon the camera.

    Steam and moisture can loosen the glue of the inside material forming the flexibility of the dark slide sections. ANother common problem is corrosion of the aluminium dividing central plate. The small screws of the hinges may need renewal.
    This is not really a competitor to your 4x5 camera as it opens up the more exciting world of contact printing.

    Unless there is a makers name or a trademark, you will never be able to recognise the maker, as there are no distinguishing wood or brass details. Makers based in Gorlitz were adept at designing smart trademarks.

  8. #8

    Re: Bought a no-name tailboard by accident..

    That is a real beauty.
    --- Steve from Missouri ---

Similar Threads

  1. Bought only half a camera... by accident
    By Sirenn in forum LF DIY (Do It Yourself)
    Replies: 9
    Last Post: 17-Feb-2014, 07:14
  2. Polaroid Type 55 accident
    By Chris Strobel in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 4-Aug-2006, 18:54
  3. Steve Simmons accident
    By Kirk Gittings in forum Announcements
    Replies: 58
    Last Post: 13-Jul-2006, 08:47

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •